Airtac TN Double Axis Double Rod Cylinder TN32X90S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN32X90S is a genuine TN twin-rod (double-rod) double-acting cylinder, 32 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 804.3 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore32 mm
- Push thrust @0.5 MPa804.3 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN32X90S
The TN32X90S is a double-acting twin-rod cylinder: two parallel rods on one shared plate give resistance to bending and twisting, so the mounted load never rotates. With a 32mm bore and 90mm stroke it produces a theoretical push thrust of about 804.2 N at 0.5 MPa on the push side (pull side is lower) on air filtered to 40 um, covering medium-stroke push, clamp and transfer work. The external front bumper cushions end-of-stroke impact and doubles as a stroke adjuster over -5 to 0 mm.
This is a genuine AirTAC part made to the enterprise-standard TN specification with PT thread ports. A magnet is fitted as standard on the whole series, with magnetic-switch slots around the body for position sensing. Because overall dimensions scale with stroke, we confirm exact dimensions and sizing from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN32X90S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN32X90S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 804.3 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Pick the bore by thrust: this 32mm bore gives about 804.2 N theoretical push at 0.5 MPa, with operating pressure of 0.15-1.0 MPa (22-145 psi). TN is the enterprise-standard series and is limited to PT thread - choose the JIS-standard TR series if you need G or NPT ports or TR's precise guide with low rod-end deflection and a lengthening sliding-support guide that needs no added lubricant. The 90mm stroke here is a catalog stroke for the TN 32 bore; stay within the table and avoid over-long strokes that can need extra support. For side-load figures, which are published as curves, route your load case to us and we will confirm from the datasheet.
Applications
Transfer pusher between conveyor lanes
The plate pushes cartons or trays sideways from one lane to another. Twin rods mean the plate travels without rotating, so products stay aligned through the 90mm transfer, and the bumper cushions the stroke ends.
Ejector on a stamping or press tool
Mounted in the die, the non-rotating plate ejects finished parts cleanly off the tool face. Twin rods resist bending and twisting under the ejection load, and the 804.2 N push thrust at 0.5 MPa clears the part on every cycle.
Product stopper at a picking station
The plate rises into the tote path to stop flow-rack totes at the picker. The twin-rod plate stays square to the tote, the magnet and body switch slots signal stopper position, and the bumper absorbs the tote's arrival.
FAQ
Is the magnet in the TN32X90S an optional extra, and which ports does it use?
No - the magnet is standard on every model in the series; there is no non-magnetic version, so you can fit magnetic switches in the body slots for end-of-stroke sensing right away. Ports are PT thread (the trailing letters decode the 32mm bore and 90mm stroke). Only the TR series adds G and NPT thread choices.
What loads can the plate carry without rotating, and are there side-load limits?
The twin-rod design resists bending and twisting, so the load mounts on the shared plate and moves without rotating - that is its core advantage over a single-rod cylinder. Side-load and rod-end deflection are published only as curves, not as single numbers, and dimensions change with stroke, so confirm your specific load and mounting from the datasheet or ask us to check it.