Airtac 3V-F Base 3V200M8F
The AirTAC Airtac 3V-F Base 3V200M8F is a genuine 3V-F manifold base manifold base for 8 stations on one shared air supply. A base is a machined block: it carries no coil and no solenoid, so the valves that sit on it are ordered separately.
- Valve type3/2-way (3-port, 2-position)
- Stations8
- Series3V-F manifold base
About the Airtac 3V-F Base 3V200M8F
Eight stations, one block: the 3V200M8F manifold base lets you group eight 3/2 valves where the machine needs them, all fed from one air connection. When a station misbehaves, one look down the row shows which valve to swap, and a common supply means fewer fittings to leak. The base itself holds no coil, so no electrical rating applies to it.
You are buying a genuine AirTAC base; the valves that sit on it are ordered separately. Across the family both NC and NO states, all five coil voltages and both electrical entries are available. If you need datasheet figures - pressure, flow, coil power - for the valves you plan to fit, ask and we will confirm them for your build.
Airtac 3V-F Base 3V200M8F Technical Specifications
| Model | Airtac 3V-F Base 3V200M8F |
|---|---|
| Series | 3V-F manifold base |
| Item form | Manifold base (no coil, no solenoid, no initial state) |
| Stations | 8 |
| Port size | Confirm from the datasheet — ask us |
| Thread | PT |
| Operating pressure | Confirm from the datasheet — ask us |
|---|---|
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
Model Code: Airtac 3V-F Base 3V200M8F
| 3V-F manifold base | Body. |
|---|---|
| 8F | 8 stations in one assembly. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V-F Base 3V200M8F Is Used
Packaging line diverters
Eight small air actuators that push cartons or divert product on a packaging conveyor, each driven by its own station on the shared supply.
Cabinet pilot bank
A control cabinet that sends on/off pilot signals to larger process valves, with every 3/2 station wired back through one tidy loom.
Filter housing venting
A row of filter housings on a food-plant filling line, each one vented or re-pressurised between batches by its own valve on the manifold.
Is the Airtac 3V-F Base 3V200M8F the Right Part?
Order the valves separately: a base arrives without any. For each of the eight stations, choose NC (no air at the outlet until the coil is energised) or NO (air flows until power is lost), a coil voltage that matches your control panel exactly, and the electrical entry your cabinet uses - a flying lead arrives pre-wired where a DIN plug needs a socket. Filter the air before any solenoid valve. We hold no published flow data for this family, so send the actuator details and we will confirm sizing on request; for figures published today, look at the documented 3V2 and 3V3 valve bodies. A double-acting cylinder is beyond any 3/2 valve - that job belongs to the AirTAC 4V series.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Blank any unused station on the base before pressurising.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V-F Base 3V200M8F FAQ
For this family we confirm those figures from the datasheet on request rather than publishing them here. If you want documented numbers today, the AirTAC 3V2 and 3V3 bodies carry published flow and coil-power figures - tell us your port size and we will point you to the right one.
No. A 3/2 valve has one outlet that is either fed or vented, which suits single-acting spring-return cylinders, clamps and blow-off. A double-acting cylinder needs pressure on both sides, so use a 5-port AirTAC 4V valve instead.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for Airtac 3V-F Base 3V200M8F
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.