Airtac 3V2M Solenoid Valve 3V2MNOE-16F
The AirTAC Airtac 3V2M Solenoid Valve 3V2MNOE-16F is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally open
- Port size1/8 in
- Coil voltageAC24V
- Electrical entryDIN plug (DIN socket type)
- Stations16
- Flow (Cv)0.1
- Series3V2M
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 3V2M Solenoid Valve 3V2MNOE-16F
Sixteen identical 3/2 stations make up the 3V2MNOE-16F: normally open valve bodies on a single AirTAC 3V2M base, coils rated AC24V at 7 VA and plugged into DIN sockets. Each station is direct-acting and spring returned around a coaxial shut-off poppet, giving three ports and two states - feed the outlet, or dump it to exhaust. Flow coefficient is Cv 0.1 per valve.
The NO logic inverts the usual wiring habit: outlets are live with air as soon as supply is on, and energising a coil shuts that station and vents it. Sixteen energised coils together ask for about 112 VA, worth noting when you size the transformer. All sixteen valves share one air inlet, one electrical entry and one centralised PT1/8 exhaust, so a fault is traced on one loom rather than across sixteen separate hookups.
Airtac 3V2M Solenoid Valve 3V2MNOE-16F Technical Specifications
| Model | Airtac 3V2M Solenoid Valve 3V2MNOE-16F |
|---|---|
| Series | 3V2M |
| Valve type | 3/2-way (3-port, 2-position) |
| Function | Direct-acting, single solenoid, spring return |
| Initial state | Normally open |
| Item form | Complete assembly — 16 valves on a shared base |
| Exhaust | Centralised exhaust |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | AC24V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | 7 VA |
| Operating pressure | 0-0.8 MPa (0-114 psi) |
| Vacuum service | Not rated for vacuum |
| Flow coefficient | Cv 0.1 |
| Temperature | -20 to 70 C |
| Construction | Coaxial shut-off (poppet), base-mounted, spring return |
| Protection | IP65 (DIN 40050) |
| Medium | Air, filtered by a 40 µm or finer element. Lubrication not required. |
Figures follow the official AirTAC 3V2M catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Model Code: Airtac 3V2M Solenoid Valve 3V2MNOE-16F
| 3V2M | Body — sets the flow, the coil power and whether vacuum is rated. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NO | Normally open: air passes until the coil is energised. |
| AC24V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| 16F | 16 stations in one assembly, centralised exhaust. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V2M Solenoid Valve 3V2MNOE-16F Is Used
Conveyor gate stoppers
Spring-raised stopper pins on a bottling conveyor hold crates between stations; with NO valves they stay fed through a control outage and drop only when a coil is energised to vent.
Tray ejectors on an SMT line
Each ejector finger on a PCB handling magazine stays extended while de-energised and retracts the moment its station vents, so a board is never left unsupported by a failed solenoid.
Emergency line exhaust headers
A plastic extrusion line vents trapped clamp air to a safe state on command; energising the relevant NO station dumps that circuit while the other fifteen keep working.
Is the Airtac 3V2M Solenoid Valve 3V2MNOE-16F the Right Part?
This assembly wins where many small 3/2 duties sit side by side and Cv 0.1 per valve is enough. If one circuit runs short of flow, an individual 3V2 delivers Cv 0.18 on 1/8 or 0.19 on 1/4 and is vacuum-rated; a 3V3 reaches Cv 0.62 on a 1/4 port and is also vacuum-rated. Light duties on a tight power budget suit the 3V1 at 3.0 W DC. A double-acting cylinder needs both pressure and exhaust at once, so it belongs on the AirTAC 4V 5-port series, not here.
Before ordering, settle the five-point match: normally open state, AC24V coil, DIN plug entry, 16 stations, centralised exhaust, plus thread - PT1/8 is the family standard, with G or NPT available to order. The NO configuration is permanent once built and cannot be swapped for NC afterwards.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Blank any unused station on the base before pressurising.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V2M Solenoid Valve 3V2MNOE-16F FAQ
Each 3/2 station has one outlet, so it controls single-acting spring-return cylinders, air clamps, blow nozzles and pilot stages. It cannot drive a double-acting cylinder, which needs simultaneous pressure and exhaust ports - use the AirTAC 4V 5-port series for that duty.
Each valve offers Cv 0.1, operates at 0-0.8 MPa (0-114 psi) between -20 and 70 C, and its AC24V coil takes 7 VA (DC builds of this family take 7.0 W), sealed to IP65 per DIN 40050. Sixteen stations share one supply and one centralised exhaust on a PT1/8 manifold; air must be filtered to 40 um or better, with no lubrication needed.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for Airtac 3V2M Solenoid Valve 3V2MNOE-16F
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.