Airtac ACE Compact Cylinder ACE32X75
The AirTAC Airtac ACE Compact Cylinder ACE32X75 is a genuine double acting ISO 21287 compact air cylinder with a Ø32mm bore and 75mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE32X75
This AirTAC ACE32X75 is a double acting compact cylinder with a 32 mm bore and 75 mm stroke, delivering 402.1 N of push force at 0.5 MPa. Its ISO 21287 short body takes up about 50% less mounting length than an ISO 15552 profile cylinder, which makes it a strong fit for tight automation frames and guarding panels.
A practical rule of thumb is to plan for about 241 N of real work at 0.5 MPa, which translates to lifting roughly 25 kg vertically with a 2:1 safety margin. The hard-anodized aluminium body and S45C hard-chrome plated rod resist wear in continuous cycling, while the fixed TPU bumper at each end absorbs end-of-stroke impact. This unit has no magnet, so CMSE or DMSE sensors cannot be mounted unless you order the optional -S version.
Airtac ACE Compact Cylinder ACE32X75 Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE32X75 |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE32X75
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE32X75 Is Used
Jig Clamping
Use the 402.1 N push force to clamp small sheet-metal parts in a drilling jig, where the compact body fits between guide pillars without extending beyond the work envelope.
Carton Tucking
Drive a tucking blade to fold flaps on a semi-automatic carton former, cycling at 30-500 mm/s to keep pace with manual loading stations.
Guard Door Stop
Position a stop pin on a machine guard door, using the 75 mm stroke to retract the pin fully clear of the door track for safe access.
Is the Airtac ACE Compact Cylinder ACE32X75 the Right Cylinder?
For lighter indexing tasks, the ACE25X75 offers 245.4 N push at 0.5 MPa, while the ACE40X75 steps up to 628.3 N push for heavier clamping. The 1/8" port suits 6 mm or 8 mm tubing with standard fittings, and the M8x1.25 female rod thread accepts common clevis or rod-end accessories. Since this is a plain double acting cylinder, it will not hold a load when air pressure is removed; use a rod lock or pilot check valve for vertical lifting applications. The FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot, and FTC brackets all bolt directly to the ISO 21287 face, so mounting into existing fixtures is straightforward.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE32X75 FAQ
At 0.5 MPa, the push force is 402.1 N and the pull force is 345.6 N. At 0.7 MPa, push increases to 563 N and pull to 483.8 N. The theoretical maximum force at 1.0 MPa is 82 kgf. The operating pressure range is 0.15-1.0 MPa (22-145 psi) with a proof pressure of 1.5 MPa (215 psi).
The ACE32X75 follows ISO 21287, so its body is about 50% shorter than an ISO 15552 profile cylinder, which helps in tight spaces. It has a fixed TPU bumper at both ends to absorb impact. This version has no magnet, so you cannot mount CMSE or DMSE sensors on it. To use sensors, you must order the -S option, which adds the magnet for switch detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE32X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.