Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X40-30B
The AirTAC Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X40-30B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø80mm bore and 40mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
- BoreØ80 mm
- Full stroke40 mm
- Port sizePT3/8
- Adjuster threadM20×1.5
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X40-30B
The AirTAC ACQJ80X40-30B is a double-acting JIS compact cylinder with an external threaded stop that limits the extend end position. You can fine-tune the usable extend range from 10 mm up to the full 40 mm directly on your machinery, while the retract stroke remains completely unaffected.
Because the adjuster only alters travel length and not piston area, output force stays identical to a standard ACQ of this bore. This male-rod (-B) variant drives loads directly via its M22x1.5 thread, handling 2513.2 N of push at 0.5 MPa. It features a fixed NBR elastomer bumper at each end and operates reliably between -20 and +70 C.
Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X40-30B Technical Specifications
| Model | Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X40-30B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Full stroke | 40 mm |
| Adjuster thread | M20×1.5 |
| Port size | PT3/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M16×2.0 (F) / M22×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; the piston area — and therefore the force — is the same as a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Force equals a standard ACQ of the same bore — the adjuster changes stroke length, not piston area. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X40-30B
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×40 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Where the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X40-30B Is Used
CNC Clamp Tuning
Dial in the exact clamping reach on a CNC machining center during initial tool setup, using the external stop to avoid over-travel on delicate castings.
Packaging Diverter Stops
Adjust the extend position of a sorting gate on a packaging line to accommodate different carton widths without swapping out the entire cylinder body.
Assembly Press Positioning
Set precise trial end positions for pressing bearings on an automated assembly line, allowing operators to shorten the stroke by up to 30 mm on the fly.
Is the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X40-30B the Right Cylinder?
When sizing this unit, stepping down to a 63 mm bore yields 1558.6 N of push at 0.5 MPa, whereas stepping up to a 100 mm bore provides 3927.0 N. If your setup never requires end-position tweaks, a fixed-stroke ACQ cylinder will suffice and save complexity. To order this adjustable version correctly, confirm the 80 mm bore, 40 mm full stroke, 30 mm window, the male M22x1.5 rod thread, and note that this specific SKU ships without a sensor magnet.
Quick checklist
- ✓ Need on-machine end-position tuning?
- ✓ Full stroke and adjust window (mm)
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the adjuster nut after setting the stop.
- check The stop limits the EXTEND stroke only.
- check Avoid side load on the short piston rod.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X40-30B FAQ
This 80 mm bore cylinder delivers 2513.2 N of push and 2267.8 N of pull at 0.5 MPa, 3518.5 N of push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. The -30 mm window allows you to shorten the extend stroke by up to 30 mm, giving a usable extend range of 10-40 mm.
An external M20x1.5 threaded stop with a lock nut mechanically limits the extend travel, leaving the retract stroke untouched. Force remains identical to a standard ACQ because piston area is unchanged, and deceleration relies on a fixed elastomer bumper rather than an adjustable air cushion. Note that this cylinder will not hold its load if air pressure is lost; install an external rod lock for fail-safe positioning.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQJ Compact Cylinders
Request a Quote for Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X40-30B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.