Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10
The AirTAC Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø80mm bore and 5mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
- BoreØ80 mm
- Full stroke5 mm
- Port sizePT3/8
- Adjuster threadM20×1.5
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10
The AirTAC ACQJ80X5-10 is a double-acting JIS compact cylinder with an external M20x1.5 threaded stop and lock nut that limits the extend end position. With a full stroke of 5 mm and a 10 mm adjustment window, you can fine-tune the usable extend range from 0 to 5 mm directly on the machine. The retract stroke remains completely unaffected.
Because the piston area is unchanged, output force is identical to a standard ACQ of this bore. This 80 mm bore unit delivers 2513.2 N push and 2267.8 N pull at 0.5 MPa. It features a 25 mm rod, PT3/8 porting, and fixed NBR elastomer bumpers at both ends for end-of-stroke deceleration.
Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10 Technical Specifications
| Model | Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Full stroke | 5 mm |
| Adjuster thread | M20×1.5 |
| Port size | PT3/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M16×2.0 (F) / M22×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; the piston area — and therefore the force — is the same as a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Force equals a standard ACQ of the same bore — the adjuster changes stroke length, not piston area. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×5 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Where the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10 Is Used
Short-Stroke Clamping
Ideal for machining fixtures needing precise 0-5 mm clamping adjustments on varied part thicknesses without swapping cylinders.
Product Changeover Stops
Quickly reset the extend end position on packaging lines during format changes, using the external stop to dial in the exact 5 mm stroke.
Assembly Press Positioning
Dial in trial end positions on automated assembly presses to prevent over-travel, relying on the 513 kgf max push force for secure seating.
Is the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10 the Right Cylinder?
This 80 mm bore provides 2513.2 N push at 0.5 MPa. If you need less force, a 63 mm bore yields 1558.6 N push, while stepping up to a 100 mm bore provides 3927.0 N. A standard fixed-stroke ACQ is sufficient if your end position never requires tuning. Confirm your ordering essentials: 80 mm bore, 5 mm full stroke, 10 mm window, female rod thread, and whether you need the magnet for sensors.
Quick checklist
- ✓ Need on-machine end-position tuning?
- ✓ Full stroke and adjust window (mm)
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the adjuster nut after setting the stop.
- check The stop limits the EXTEND stroke only.
- check Avoid side load on the short piston rod.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10 FAQ
It delivers 2513.2 N push and 2267.8 N pull at 0.5 MPa, 3518.5 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. The usable extend range is 0-5 mm, created by the 5 mm full stroke minus the 10 mm adjustment window. The retract stroke is unaffected, and force equals a standard ACQ because the adjuster only changes stroke length, not piston area.
An external M20x1.5 threaded stop with a lock nut limits the extend stroke, allowing on-machine tuning without new parts. The cylinder uses fixed elastomer bumpers for deceleration, not adjustable air cushions. This specific model ships without a sensor magnet, though the body retains magnetic-switch grooves for adding external reed or solid-state sensors if needed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQJ Compact Cylinders
Request a Quote for Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.