Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10B
The AirTAC Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø80mm bore and 5mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
- BoreØ80 mm
- Full stroke5 mm
- Port sizePT3/8
- Adjuster threadM20×1.5
About the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10B
The AirTAC ACQJ80X5-10B is a double-acting JIS compact cylinder featuring an external threaded stop with a lock nut that restricts the extend end position. You can tune the usable extend range from 0 mm up to the full 5 mm stroke directly on the machine, while the retract stroke remains unaffected. It includes a male-thread piston rod end (M22x1.5) that couples directly to your load.
Because the adjuster only limits travel and not the piston area, the output force equals that of a standard ACQ of the same bore. At 0.5 MPa, it delivers 2513.2 N of push force and 2267.8 N of pull force. The unit relies on a fixed NBR elastomer bumper at each end for deceleration rather than an adjustable air cushion, and operates on PT3/8 porting.
Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10B Technical Specifications
| Model | Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Full stroke | 5 mm |
| Adjuster thread | M20×1.5 |
| Port size | PT3/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M16×2.0 (F) / M22×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; the piston area — and therefore the force — is the same as a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Force equals a standard ACQ of the same bore — the adjuster changes stroke length, not piston area. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10B
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×5 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Where the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10B Is Used
Clamp Position Trimming
Dial in the exact 0-5 mm extend stop on a machining fixture to accommodate varying raw material thicknesses without swapping out cylinder hardware.
Short-Stroke Forming
Regulate the extend end position on a small-stroke metalworking press to test contact depth precisely before finalizing the mechanical setup.
Product Changeover Stops
Adapt a compact 80 mm bore pusher on a packaging line to different carton sizes by adjusting the external stop nut for each product run.
Is the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10B the Right Cylinder?
For tasks needing 2513.2 N push at 0.5 MPa, this 80 mm bore provides the necessary thrust; dropping to a 63 mm bore lowers push to 1558.6 N, whereas stepping up to 100 mm yields 3927.0 N. If the exact 5 mm extend position is permanently fixed and never requires tweaking, a standard non-adjustable ACQ cylinder will suffice. When ordering, verify the 80 mm bore, 5 mm full stroke, 10 mm adjuster window, the male B rod thread, and confirm no magnet is needed since this configuration omits the -S option.
Quick checklist
- ✓ Need on-machine end-position tuning?
- ✓ Full stroke and adjust window (mm)
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the adjuster nut after setting the stop.
- check The stop limits the EXTEND stroke only.
- check Avoid side load on the short piston rod.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10B FAQ
It provides 2513.2 N push and 2267.8 N pull at 0.5 MPa, 3518.5 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. The usable extend range is 0-5 mm (a 5 mm full stroke minus the 10 mm adjustable window), while the retract stroke remains unaffected.
The external M20x1.5 threaded stop with a lock nut limits only the extend travel, meaning the force is identical to a standard ACQ because the piston area is unchanged. The cylinder uses a fixed NBR elastomer bumper at each end for deceleration rather than an adjustable air cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQJ Compact Cylinders
Request a Quote for Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.