Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10S
The AirTAC Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10S is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø80mm bore and 5mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
- BoreØ80 mm
- Full stroke5 mm
- Port sizePT3/8
- Adjuster threadM20×1.5
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10S
The AirTAC ACQJ80X5-10S is a double-acting JIS compact cylinder featuring an external threaded stop with a lock nut that limits the EXTEND end position. With a full stroke of 5mm and a 10mm adjustment window, the usable extend range runs from 0 up to 5mm. The RETRACT stroke remains completely unaffected by this mechanism. An M20x1.5 adjuster thread enables fine-tuning without swapping parts.
Because the piston area is unchanged, the output force is identical to a standard ACQ of this 80mm bore. The cylinder delivers 2513.2N push and 2267.8N pull at 0.5MPa. It features fixed elastomer NBR bumpers at each end for end-of-stroke deceleration, and the -S piston magnet works with reed or solid-state switches.
Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10S Technical Specifications
| Model | Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10S |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Full stroke | 5 mm |
| Adjuster thread | M20×1.5 |
| Port size | PT3/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M16×2.0 (F) / M22×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; the piston area — and therefore the force — is the same as a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Force equals a standard ACQ of the same bore — the adjuster changes stroke length, not piston area. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10S
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×5 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Where the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10S Is Used
Short-Stroke Clamping
Dial in precise 0-5mm clamping pressure on varying thickness workpieces without re-engineering the fixture.
Product Changeover Stops
Adjust the extend end position rapidly on a packaging line when switching to a different carton format.
Prototype Positioning
Test trial end positions on a new assembly rig, fine-tuning the extend stop to find the exact operating point.
Is the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10S the Right Cylinder?
For sizing context, stepping down to a 63mm bore yields 1558.6N push, while stepping up to a 100mm bore provides 3927.0N push at 0.5MPa. If your application requires a fixed 5mm extend stroke without on-machine variation, a standard ACQ80X5 is sufficient. When ordering this adjustable version, confirm the 80mm bore, 5mm full stroke, 10mm window, the -S magnet for sensor grooves, and the default female M16x2.0 rod-end thread with PT3/8 port.
Quick checklist
- ✓ Need on-machine end-position tuning?
- ✓ Full stroke and adjust window (mm)
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the adjuster nut after setting the stop.
- check The stop limits the EXTEND stroke only.
- check Avoid side load on the short piston rod.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10S FAQ
Force is identical to a standard ACQ: 2513.2N push and 2267.8N pull at 0.5MPa, 3518.5N push at 0.7MPa, and a maximum push of 513kgf at 1.0MPa. The full stroke is 5mm with a 10mm window, giving a usable extend range of 0-5mm. The retract stroke is unaffected.
An external M20x1.5 threaded stop with a lock nut mechanically limits the extend stroke; it changes stroke length only, leaving piston area and force unchanged. The cylinder uses fixed elastomer bumpers, not adjustable air cushions. It will not hold a load on air loss—use an external rod lock for fail-safe holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQJ Compact Cylinders
Request a Quote for Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X5-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.