Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ25X15
The AirTAC Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ25X15 is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø25mm bore and 15mm stroke, M5×0.8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
- BoreØ25 mm
- Stroke15 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM6×1.0 (F) / M10×1.25 (B)
- ConfigurationStandard compact
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ25X15
The B01-ACQ25X15 is an AirTAC application-dedicated (customer-specified) variant of the standard ACQ25X15, sharing identical mechanics: a double-acting, single-rod JIS compact cylinder. It yields 245.4 N of push force and 188.9 N of pull force at 0.5 MPa. The short C-clip and riveted body design drastically reduce axial footprint compared to round-body alternatives.
This 25 mm bore unit features a 12 mm piston rod and an M5x0.8 port. It relies on a fixed TPU elastomer bumper at each end to absorb end-stop energy rather than an adjustable air cushion. The body includes magnetic-switch grooves, though this specific SKU ships without the internal magnet.
Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ25X15 Technical Specifications
| Model | Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ25X15 |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø25 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod end thread | M6×1.0 female / M10×1.25 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 189 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ25X15
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 25 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Where the Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ25X15 Is Used
PCB Depaneling Router
Provides the precise 15 mm cutting stroke and 245.4 N extension force needed to plunge router bits into assembled circuit panels.
Carton Flap Folding
Actuates a short mechanical arm to tuck minor flaps on packaging lines, utilizing the space-saving short body to fit within tight conveyor frames.
Lab Sample Ejection
Pushes processed vials out of a centrifuge carousel with controlled speed, relying on the fixed TPU bumper to soften the 15 mm end stop.
Is the Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ25X15 the Right Cylinder?
When sizing this actuator, stepping down to the 20 mm bore reduces thrust to 157.1 N at 0.5 MPa, while stepping up to the 32 mm bore increases it to 402.1 N. Note that a plain compact cylinder like this drifts if air pressure drops or the valve centers; the fixed bumper only decelerates near stroke end and will not lock the load. For fail-safe holding, an external rod lock or pilot-operated check valve is required. To order, confirm the 25 mm bore, 15 mm stroke, M5x0.8 port, female M6x1.0 rod thread, and no magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short-body depth vs. a round-body cylinder
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
- ✓ Side load — avoid on a compact rod
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the short piston rod.
- check Very long strokes are unsuitable for the compact body.
- check Handle the C-clip carefully; seat it fully in its groove.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ25X15 FAQ
This 25 mm bore cylinder provides 245.4 N push and 188.9 N pull at 0.5 MPa, 343.6 N push at 0.7 MPa, and a maximum push of 50 kgf at 1.0 MPa. It operates at 30-500 mm/s within a 0.15-1.0 MPa pressure range.
The B01- prefix designates an AirTAC application-dedicated (customer-specified) line that is mechanically identical to the ACQ25X15. While the body retains sensor grooves for reed or electronic switches, this specific configuration ships without the internal magnet, so external position sensing is not supported without modification.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ25X15
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.