Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ25X30S
The AirTAC Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ25X30S is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø25mm bore and 30mm stroke, M5×0.8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
- BoreØ25 mm
- Stroke30 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM6×1.0 (F) / M10×1.25 (B)
- ConfigurationStandard compact
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ25X30S
The AirTAC B01-ACQ25X30S is a double-acting, single-rod JIS compact cylinder engineered for tight axial spaces. The B01- prefix designates an application-dedicated (customer-specified) variant of the standard ACQ25X30S, meaning it shares the exact same mechanical architecture and physical footprint while serving a specific industry need. It generates 245.4 N of push force and 188.9 N of pull force at 0.5 MPa.
This model features a 12 mm piston rod and a C-clip/riveted body that drastically reduces overall length compared to round-body alternatives. End-of-stroke energy is managed by a fixed TPU elastomer bumper rather than an adjustable air cushion, making it ideal for predictable, short-stroke movements. The built-in piston magnet (-S) enables position detection via AirTAC reed or electronic switches mounted in the body grooves.
Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ25X30S Technical Specifications
| Model | Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ25X30S |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø25 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod end thread | M6×1.0 female / M10×1.25 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 189 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ25X30S
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 25 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Where the Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ25X30S Is Used
PCB Depaneling Router
Provides the precise 30 mm linear push to separate routed circuit boards, utilizing the 245.4 N extend force to cleanly break panels without stressing adjacent components.
Carton Flap Folder
Actuates folding arms on a packaging line to tuck corrugated box flaps, where the short JIS compact body saves valuable mounting depth along the conveyor frame.
Lab Dispense Head
Drives a metered fluid valve downward for chemical dosing, relying on the integrated magnet to trigger an electronic switch at the exact bottom position for repeatable shot volumes.
Is the Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ25X30S the Right Cylinder?
When sizing this 25 mm bore actuator, consider stepping down to the 20 mm version if your load requires less force (157.1 N push at 0.5 MPa), or stepping up to the 32 mm bore for heavier payloads (402.1 N push at 0.5 MPa). Keep in mind that a plain compact cylinder like this does not hold its position if air pressure is lost or the valve is centered; the rod will drift, and the fixed bumper only decelerates it near the stroke end. For fail-safe holding, an external rod lock or pilot-operated check valve is required.
To order, confirm the 25 mm bore, 30 mm stroke, M5x0.8 port, default female rod-end thread (M6x1.0), and the required -S magnet for switch sensing. The operating speed ranges from 30-500 mm/s.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short-body depth vs. a round-body cylinder
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
- ✓ Side load — avoid on a compact rod
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the short piston rod.
- check Very long strokes are unsuitable for the compact body.
- check Handle the C-clip carefully; seat it fully in its groove.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ25X30S FAQ
This double-acting cylinder provides 245.4 N push and 188.9 N pull at 0.5 MPa, 343.6 N push at 0.7 MPa, and a maximum push of 50 kgf at 1.0 MPa. The maximum standard stroke available for the 25 mm bore is 100 mm.
The B01- prefix indicates an application-dedicated (customer-specified) variant of the ACQ25X30S, mechanically identical to the base model. It uses a fixed TPU elastomer bumper at each end to absorb end stops; it is not an adjustable air cushion. For high-speed or high-energy cycles, add an external shock absorber or slow the approach.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-ACQ Dedicated Pneumatic Cylinder B01-ACQ25X30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.