Airtac B01-SDA Dedicated Cylinder B01-SDA32X10B
The AirTAC Airtac B01-SDA Dedicated Cylinder B01-SDA32X10B is a genuine double-acting COMPACT (thin) air cylinder with a Ø32mm bore and 10mm stroke, PT1/8 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
- BoreØ32 mm
- Stroke10 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM6×1.0 (F) / M10×1.25 (B)
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B01-SDA Dedicated Cylinder B01-SDA32X10B
The AirTAC B01-SDA32X10B is a double-acting, single-rod compact cylinder. The leading "B01-" prefix designates this as an application-dedicated (customer-specified) variant of the standard SDA32X10B, meaning it is mechanically identical to the base model. It delivers 402.1 N of push force and 345.6 N of pull force at 0.5 MPa, utilizing a hard-anodized 32 mm bore and a two-way piston seal.
Designed to save axial mounting depth, its short riveted body fits where round-body units cannot. This specific SKU features a male M10x1.25 piston rod thread (denoted by the B option) instead of the default female M6x1.0, providing a robust external load coupling. End-stopping relies on a fixed NBR bumper rather than an adjustable air cushion, and because this configuration lacks the S magnet option, it cannot host magnetic position switches.
Airtac B01-SDA Dedicated Cylinder B01-SDA32X10B Technical Specifications
| Model | Airtac B01-SDA Dedicated Cylinder B01-SDA32X10B |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M6×1.0 female / M10×1.25 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-SDA Dedicated Cylinder B01-SDA32X10B
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Where the Airtac B01-SDA Dedicated Cylinder B01-SDA32X10B Is Used
PCB Edge Guiding
Provides precise 10 mm lateral positioning on a conveyor belt for printed circuit board fabrication, leveraging the 402.1 N push force to square panels before optical inspection.
Carton Flap Folding
Drives a short mechanical arm to tuck minor flaps on a packaging line, where the compact riveted body minimizes axial footprint and the male M10x1.25 rod threads securely into the linkage.
Stamping Ejector
Ejects small stamped metal parts from a progressive die bed, using the 345.6 N retract force to pull the tooling clear within a tight 30-500 mm/s operational speed band.
Is the Airtac B01-SDA Dedicated Cylinder B01-SDA32X10B the Right Cylinder?
When sizing this unit, evaluate your force needs both ways: stepping down to the SDA25 yields 245.4 N of push at 0.5 MPa, while stepping up to the SDA40 provides 628.3 N. At 0.5 MPa, this 32 mm bore achieves a safe working load of roughly 241 N (about 60 percent of its 402.1 N capacity) and can vertically lift approximately 20.5 kg with a 2:1 safety margin. To order, confirm the 32 mm bore, 10 mm stroke, PT1/8 port, and the male M10x1.25 rod thread. Note that a plain compact cylinder drifts if air pressure is lost or the valve is centered; the fixed bumper only decelerates the stroke end and does not function as a locking brake. For suspended loads, specify an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short-body depth vs. a round-body cylinder
- ✓ Port/thread type (PT)
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
- ✓ Side load — avoid on a compact rod
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the short piston rod.
- check Very long strokes are unsuitable for the compact body.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-SDA Dedicated Cylinder B01-SDA32X10B FAQ
The 32 mm bore generates 402.1 N push and 345.6 N pull at 0.5 MPa, increasing to 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum push is 82 kgf at 1.0 MPa. Operating pressure spans 0.15-1.0 MPa, with a proof pressure of 1.5 MPa, and the speed range is 30-500 mm/s.
The B01- prefix simply marks this as an application-dedicated (customer-specified) build of the SDA32X10B; all physical specifications remain identical to the base model. It uses a fixed NBR bumper at each end to decelerate the stroke, which is not an adjustable air cushion. For high-energy cycles, slow the approach speed or install an external shock absorber.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-SDA Dedicated Cylinder B01-SDA32X10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.