Airtac B01-SDA Dedicated Cylinder B01-SDA32X30S
The AirTAC Airtac B01-SDA Dedicated Cylinder B01-SDA32X30S is a genuine double-acting COMPACT (thin) air cylinder with a Ø32mm bore and 30mm stroke, PT1/8 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
- BoreØ32 mm
- Stroke30 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM6×1.0 (F) / M10×1.25 (B)
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B01-SDA Dedicated Cylinder B01-SDA32X30S
The AirTAC B01-SDA32X30S is a double-acting, single-rod compact cylinder. The leading B01- prefix designates this as an application-dedicated (customer-specified) variant, mechanically identical to the standard SDA32X30S. It delivers 402.1 N of push force and 345.6 N of pull force at 0.5 MPa. Its short riveted body significantly reduces axial mounting depth compared to round-body units, saving valuable machine footprint.
This 32 mm bore unit features a 12 mm piston rod and PT1/8 ports. The -S suffix indicates a built-in piston magnet for direct mounting of AirTAC reed or electronic switches along the body grooves. End-stopping relies on a fixed NBR bumper rather than an adjustable air cushion, decelerating the piston near stroke limits without acting as a lock.
Airtac B01-SDA Dedicated Cylinder B01-SDA32X30S Technical Specifications
| Model | Airtac B01-SDA Dedicated Cylinder B01-SDA32X30S |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M6×1.0 female / M10×1.25 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-SDA Dedicated Cylinder B01-SDA32X30S
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Where the Airtac B01-SDA Dedicated Cylinder B01-SDA32X30S Is Used
PCB Depaneling Router
Actuates the tooling carriage on an automated PCB depaneling machine, utilizing the 30 mm stroke and 402.1 N force for precise board separation.
Carton Flap Folder
Folds minor flaps on a continuous carton sealing line, where the short riveted body minimizes axial intrusion into the conveyor framing.
Parts Ejector Gate
Operates a short-stroke sorting gate on a CNC lathe exit chute, using the integrated magnet to confirm eject positions via solid-state sensors.
Is the Airtac B01-SDA Dedicated Cylinder B01-SDA32X30S the Right Cylinder?
When sizing this unit, stepping down to the SDA25 yields 245.4 N push at 0.5 MPa, while stepping up to the SDA40 provides 628.3 N. For this 32 mm bore, a safe working load is approximately 241 N (about 60% of the 402.1 N figure), translating to a vertical lift capacity of roughly 20.5 kg with a 2:1 safety margin. Confirm your ordering essentials: 32 mm bore, 30 mm stroke, PT1/8 port, female M6x1.0 rod thread, and the -S magnet. Note that a plain compact cylinder drifts when air is lost or the valve is centered; the fixed bumper only decelerates near the end of travel and does not lock the load. For vertical holding, an external rod lock or pilot-operated check valve is required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short-body depth vs. a round-body cylinder
- ✓ Port/thread type (PT)
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
- ✓ Side load — avoid on a compact rod
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the short piston rod.
- check Very long strokes are unsuitable for the compact body.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-SDA Dedicated Cylinder B01-SDA32X30S FAQ
This double-acting cylinder generates 402.1 N push and 345.6 N pull at 0.5 MPa, and 563 N push at 0.7 MPa. The theoretical maximum push force is 82 kgf at 1.0 MPa. It operates at 30-500 mm/s with a max standard stroke of 130 mm for this 32 mm bore.
The B01- prefix simply marks this as an application-dedicated (customer-specified) variant of the SDA32X30S; all physical specs remain identical. It does not have an adjustable air cushion. Instead, a fixed NBR bumper at each end absorbs the end stop. For high-speed or high-energy cycles, you should add an external shock absorber or slow the approach.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-SDA Dedicated Cylinder B01-SDA32X30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.