Airtac B01-SDA Dedicated Cylinder B01-SDA32X5
The AirTAC Airtac B01-SDA Dedicated Cylinder B01-SDA32X5 is a genuine double-acting COMPACT (thin) air cylinder with a Ø32mm bore and 5mm stroke, PT1/8 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
- BoreØ32 mm
- Stroke5 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM6×1.0 (F) / M10×1.25 (B)
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B01-SDA Dedicated Cylinder B01-SDA32X5
The AirTAC B01-SDA32X5 is a double-acting single-rod compact cylinder. The leading "B01-" prefix marks this as an application-dedicated (customer-specified) variant of the base SDA32X5, meaning it is mechanically identical but grouped for specific build requirements. It delivers a push force of 402.1 N and a pull force of 345.6 N at 0.5 MPa. Operating speed spans 30-500 mm/s.
This unit features a 32 mm bore, a 12 mm piston rod, and PT1/8 ports. Its riveted body assembly drastically reduces axial mounting depth compared to round-body alternatives. End-stopping relies on a fixed NBR bumper rather than an adjustable air cushion, so high-energy cycles may require external shock absorbers. Note that this specific SKU lacks a piston magnet and therefore cannot support position sensing.
Airtac B01-SDA Dedicated Cylinder B01-SDA32X5 Technical Specifications
| Model | Airtac B01-SDA Dedicated Cylinder B01-SDA32X5 |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M6×1.0 female / M10×1.25 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-SDA Dedicated Cylinder B01-SDA32X5
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Where the Airtac B01-SDA Dedicated Cylinder B01-SDA32X5 Is Used
PCB Edge Pinning
Provides a short 5 mm clamping action to pin circuit boards during wave soldering, utilizing its 402.1 N force without consuming valuable Z-axis height.
Pneumatic Ejector
Ejects small stamped metal parts from a press die using a rapid 5 mm tap, relying on the fixed NBR bumper to absorb the impact at the stroke end.
Sensor Bracket Indexing
Shifts a vision camera bracket by 5 mm for dual-focus inspection stations, taking advantage of the compact riveted body to fit within tight machine frames.
Is the Airtac B01-SDA Dedicated Cylinder B01-SDA32X5 the Right Cylinder?
When sizing this unit, consider stepping down to the SDA25 which provides 245.4 N of push force at 0.5 MPa, or moving up to the SDA40 which yields 628.3 N. At 402.1 N, this 32 mm bore achieves a safe working load of roughly 241 N (about 60 percent capacity) and can vertically lift approximately 20.5 kg with a 2:1 safety margin. Be aware that a standard double-acting cylinder drifts when air pressure is lost or the valve centers; the fixed bumper only decelerates the stroke end and does not function as a locking brake. To hold a load securely without live pressure, integrate an external rod lock or pilot-operated check valve. Confirm your ordering essentials: 32 mm bore, 5 mm stroke, PT1/8 port, female M6x1.0 rod thread, and no magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short-body depth vs. a round-body cylinder
- ✓ Port/thread type (PT)
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
- ✓ Side load — avoid on a compact rod
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the short piston rod.
- check Very long strokes are unsuitable for the compact body.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-SDA Dedicated Cylinder B01-SDA32X5 FAQ
This 32 mm bore double-acting cylinder generates 402.1 N push and 345.6 N pull at 0.5 MPa, increasing to 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum push force is 82 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa with a speed range of 30-500 mm/s.
The B01- prefix simply denotes an application-dedicated (customer-specified) grouping of the standard SDA32X5, with no mechanical changes to the physical specs. Because this particular SKU lacks the -S option, it has no internal piston magnet and cannot accept AirTAC reed or electronic switches. You would need the -S variant for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-SDA Dedicated Cylinder B01-SDA32X5
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.