Airtac B01-SDA Dedicated Cylinder B01-SDA32X60
The AirTAC Airtac B01-SDA Dedicated Cylinder B01-SDA32X60 is a genuine double-acting COMPACT (thin) air cylinder with a Ø32mm bore and 60mm stroke, PT1/8 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
- BoreØ32 mm
- Stroke60 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM6×1.0 (F) / M10×1.25 (B)
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B01-SDA Dedicated Cylinder B01-SDA32X60
The AirTAC B01-SDA32X60 is a double-acting, single-rod compact cylinder. The leading B01- prefix marks this as an application-dedicated, customer-specified variant of the standard SDA32X60, meaning it is mechanically identical to the base model. It delivers a push force of 402.1 N and a pull force of 345.6 N at 0.5 MPa, operating within a speed range of 30-500 mm/s.
The short riveted body significantly reduces axial mounting depth compared to round-body alternatives, saving valuable machine footprint. This unit features a 12 mm piston rod, a PT1/8 port, and a female M6x1.0 rod-end thread. Instead of an adjustable air cushion, a fixed NBR bumper decelerates the piston at stroke end. Because this specific SKU lacks the -S option, it has no piston magnet and cannot accept magnetic switches.
Airtac B01-SDA Dedicated Cylinder B01-SDA32X60 Technical Specifications
| Model | Airtac B01-SDA Dedicated Cylinder B01-SDA32X60 |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M6×1.0 female / M10×1.25 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-SDA Dedicated Cylinder B01-SDA32X60
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Where the Airtac B01-SDA Dedicated Cylinder B01-SDA32X60 Is Used
PCB Router Gating
Deploys a 60 mm stroke to gate printed circuit boards on an SMT line, utilizing the 402.1 N extend force to push panels firmly into the routing fixture.
Carton Flap Folding
Actuates a mechanical arm to fold minor flaps on corrugated shipping cartons, where the compact riveted body minimizes axial intrusion into tight packaging machine frames.
Stamping Blank Alignment
Pushes metal blanks against a hard stop to square them before a stamping press, relying on the 345.6 N retract force to reset the locating pin rapidly.
Is the Airtac B01-SDA Dedicated Cylinder B01-SDA32X60 the Right Cylinder?
When sizing this actuator, evaluate your neighbours: stepping down to the SDA25 yields 245.4 N of push at 0.5 MPa, while stepping up to the SDA40 provides 628.3 N. For the 32 mm bore at 0.5 MPa, the safe working load is roughly 241 N (about 60 percent of the 402.1 N figure), translating to a vertical lift capacity of approximately 20.5 kg with a 2:1 safety margin. To order, confirm the 32 mm bore, 60 mm stroke, PT1/8 port, female rod thread, and no magnet. Note that a plain compact cylinder drifts when air pressure is lost or the valve is centred; the fixed bumper only decelerates near the end of travel and does not function as a locking brake. If your application must hold a load without live pressure, incorporate an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short-body depth vs. a round-body cylinder
- ✓ Port/thread type (PT)
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
- ✓ Side load — avoid on a compact rod
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the short piston rod.
- check Very long strokes are unsuitable for the compact body.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-SDA Dedicated Cylinder B01-SDA32X60 FAQ
This 32 mm bore double-acting cylinder provides a push force of 402.1 N and a pull force of 345.6 N at 0.5 MPa. At 0.7 MPa, the push is 563 N and the pull is 483.8 N. The theoretical maximum push is 82 kgf at 1.0 MPa. Operating pressure spans 0.15-1.0 MPa, with a proof pressure of 1.5 MPa, and the operating temperature ranges from -20 to +70 C.
The B01- prefix designates this as an AirTAC application-dedicated, customer-specified line of the SDA32X60; mechanically, it shares the exact same physical specifications as the base model. This specific SKU does not include a piston magnet, so it cannot be used with reed or electronic switches. To add sensing capabilities, you would need the -S option variant. Additionally, it uses a fixed NBR bumper at each end rather than an adjustable air cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-SDA Dedicated Cylinder B01-SDA32X60
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.