Airtac B01-SDA Dedicated Cylinder B01-SDA50X75
The AirTAC Airtac B01-SDA Dedicated Cylinder B01-SDA50X75 is a genuine double-acting COMPACT (thin) air cylinder with a Ø50mm bore and 75mm stroke, PT1/4 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
- BoreØ50 mm
- Stroke75 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM10×1.5 (F) / M18×1.5 (B)
- CushionFixed NBR bumper (both ends)
About the Airtac B01-SDA Dedicated Cylinder B01-SDA50X75
The AirTAC B01-SDA50X75 is a double-acting single-rod compact cylinder delivering 981.7 N of push force at 0.5 MPa. The leading B01- prefix marks this as an application-dedicated (customer-specified) variant of the standard SDA50X75, meaning it is mechanically identical to the base model but grouped for specific industry builds. Its short riveted body drastically reduces axial mounting depth compared to round-body units, saving valuable machine footprint.
This 50 mm bore unit features a hard-anodized inner wall and a two-way piston seal operating at 30-500 mm/s. It relies on a fixed NBR bumper at each end to decelerate the stroke, which is not an adjustable air cushion. The rod end uses a female M10x1.5 thread on a 20 mm piston rod. Note that this specific SKU lacks a piston magnet, so it cannot host magnetic switches without upgrading to the -S option.
Airtac B01-SDA Dedicated Cylinder B01-SDA50X75 Technical Specifications
| Model | Airtac B01-SDA Dedicated Cylinder B01-SDA50X75 |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-SDA Dedicated Cylinder B01-SDA50X75
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Where the Airtac B01-SDA Dedicated Cylinder B01-SDA50X75 Is Used
Package Diverting
Pushes medium-weight cartons off a main sorting line with 981.7 N of extend force, utilizing the 75 mm stroke to clear the belt lane efficiently.
Pallet Flap Folding
Folds corrugated cardboard flaps on automated packing stations where the short riveted body prevents interference with adjacent tooling.
Press Ejection
Ejects formed metal brackets from a stamping die, handling the 50 kg vertical load capacity while operating well within the 30-500 mm/s speed range.
Is the Airtac B01-SDA Dedicated Cylinder B01-SDA50X75 the Right Cylinder?
When sizing this model, evaluate your neighbors: stepping down to the SDA40 yields 628.3 N push at 0.5 MPa, while stepping up to the SDA63 provides 1558.6 N. For this 50 mm bore, the safe working load is approximately 589 N (about 60% of the 981.7 N figure), translating to a vertical lift capacity of roughly 50 kg with a 2:1 safety margin. Confirm your ordering essentials: 50 mm bore, 75 mm stroke, PT1/4 port, female rod thread, and no sensor magnet.
Keep in mind that a plain compact cylinder does not hold its load if air pressure is lost or the valve is centered. The piston will drift, and the fixed bumper only decelerates it near the stroke end rather than acting as a lock. If your application must hold a load without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short-body depth vs. a round-body cylinder
- ✓ Port/thread type (PT)
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
- ✓ Side load — avoid on a compact rod
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the short piston rod.
- check Very long strokes are unsuitable for the compact body.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-SDA Dedicated Cylinder B01-SDA50X75 FAQ
This double-acting 50 mm bore cylinder provides 981.7 N push and 824.7 N pull at 0.5 MPa, and 1374.4 N push at 0.7 MPa. The theoretical maximum push force is 200 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, with a proof pressure of 1.5 MPa, and accepts a PT1/4 air port.
The B01- prefix simply designates an application-dedicated (customer-specified) build of the standard SDA50X75, with no mechanical changes to the bore, stroke, or seals. It uses a fixed NBR bumper at each end to decelerate the stroke, which is not a field-adjustable air cushion. For high-energy cycles, add an external shock absorber.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-SDA Dedicated Cylinder B01-SDA50X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.