Airtac B01-SDA Dedicated Cylinder B01-SDA63X10S
The AirTAC Airtac B01-SDA Dedicated Cylinder B01-SDA63X10S is a genuine double-acting COMPACT (thin) air cylinder with a Ø63mm bore and 10mm stroke, PT1/4 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
- BoreØ63 mm
- Stroke10 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM10×1.5 (F) / M18×1.5 (B)
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B01-SDA Dedicated Cylinder B01-SDA63X10S
The AirTAC B01-SDA63X10S is a double-acting single-rod compact cylinder. The B01- prefix marks this as an application-dedicated (customer-specified) variant of the SDA63X10S, meaning it is mechanically identical to the base model. It delivers 1558.6 N of push force at 0.5 MPa and 2182.1 N at 0.7 MPa, utilizing a 20mm piston rod and PT1/4 port.
Its short riveted body significantly reduces axial mounting depth compared to round-body alternatives, making it ideal for tight machine footprints. The unit includes a built-in magnet (-S) for AirTAC reed or electronic switches, and relies on a fixed NBR bumper at each end to decelerate the stroke rather than an adjustable cushion.
Airtac B01-SDA Dedicated Cylinder B01-SDA63X10S Technical Specifications
| Model | Airtac B01-SDA Dedicated Cylinder B01-SDA63X10S |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-SDA Dedicated Cylinder B01-SDA63X10S
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Where the Airtac B01-SDA Dedicated Cylinder B01-SDA63X10S Is Used
Injection Mold Ejection
Fits within tight mold platens to eject plastic parts, using the 10mm stroke to safely push finished components out of the cavity without consuming valuable machine length.
PCB Router Clamping
Secures printed circuit board panels during routing operations, providing 1558.6 N of holding force at 0.5 MPa while keeping the workhead footprint minimal.
Carton Flap Folding
Folds corrugated box flaps at high speed on packaging lines, where the fixed NBR bumper absorbs the end-stop impact and the compact body clears adjacent conveyor guides.
Is the Airtac B01-SDA Dedicated Cylinder B01-SDA63X10S the Right Cylinder?
When sizing this unit, evaluate stepping down to the SDA50 which provides 981.7 N push at 0.5 MPa, or stepping up to the SDA80 which yields 2513.3 N push at 0.5 MPa. For this 63mm bore, a safe working load is approximately 935 N (about 60% of the 0.5 MPa figure), translating to a vertical lift capacity of roughly 79.4 kg with a 2:1 safety margin. To order, confirm the 63mm bore, 10mm stroke, PT1/4 port, female M10x1.5 rod thread, and the required piston magnet. Note that a plain cylinder drifts when air is lost, so an external rod lock or pilot-operated check valve is required to hold a load securely.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short-body depth vs. a round-body cylinder
- ✓ Port/thread type (PT)
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
- ✓ Side load — avoid on a compact rod
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the short piston rod.
- check Very long strokes are unsuitable for the compact body.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-SDA Dedicated Cylinder B01-SDA63X10S FAQ
This 63mm bore cylinder generates 1558.6 N push and 1401.5 N pull at 0.5 MPa, and 2182.1 N push at 0.7 MPa. The theoretical maximum push force is 318 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, with a proof pressure of 1.5 MPa, and runs at speeds of 30-500 mm/s.
The B01- prefix designates an application-dedicated (customer-specified) line that is mechanically identical to the standard SDA63X10S. It does not feature adjustable air cushions; instead, a fixed NBR bumper at each end decelerates the piston near stroke end. For high-energy cycles, add an external shock absorber.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-SDA Dedicated Cylinder B01-SDA63X10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.