Airtac B06-ACQ Battery-Dedicated Cylinder B06-ACQ16X15SB
The AirTAC Airtac B06-ACQ Battery-Dedicated Cylinder B06-ACQ16X15SB is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø16mm bore and 15mm stroke, M5×0.8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
- BoreØ16 mm
- Stroke15 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM4×0.7 (F) / M6×1.0 (B)
- ConfigurationStandard compact
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-ACQ Battery-Dedicated Cylinder B06-ACQ16X15SB
The B06-ACQ16X15SB is an AirTAC double-acting JIS compact cylinder engineered for battery-manufacturing lines. The leading B06- prefix designates this as a battery-industry dedicated variant of the base ACQ16X15SB, meaning it shares the exact same physical specs—delivering 100.5 N of push force and 75.4 N of pull force at 0.5 MPa. Its short C-clip and riveted body construction drastically reduces axial footprint compared to traditional round-body cylinders, which is critical when densely packing actuators into cell stacking or module assembly machinery.
This specific configuration includes an S option for a built-in piston magnet, enabling position detection via AirTAC reed or electronic switches along the body grooves. The B option provides an M6x1.0 male-threaded rod end (coupled to an 8 mm rod) for direct load attachment. To absorb end-of-stroke impacts, the cylinder relies on a fixed TPU elastomer bumper rather than an adjustable air cushion, ensuring stable operation within its 30-500 mm/s speed range.
Airtac B06-ACQ Battery-Dedicated Cylinder B06-ACQ16X15SB Technical Specifications
| Model | Airtac B06-ACQ Battery-Dedicated Cylinder B06-ACQ16X15SB |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø16 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod end thread | M4×0.7 female / M6×1.0 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 60 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 75 N |
| 0.7 MPa | 141 N | — |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-ACQ Battery-Dedicated Cylinder B06-ACQ16X15SB
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 16 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Where the Airtac B06-ACQ Battery-Dedicated Cylinder B06-ACQ16X15SB Is Used
Prismatic Cell Stacking
Applies 100.5 N of precise push force at 0.5 MPa to align and press anode and cathode layers during lithium-ion prismatic cell stacking machines.
Battery Tab Welding
Utilizes the M6x1.0 male rod end to securely clamp copper and aluminum battery tabs under a welding head, ensuring zero deflection during ultrasonic joining.
Module Tray Handling
Employs the short 15 mm stroke and built-in position magnet to push battery module trays into testing fixtures, saving axial space in high-density conveyor lines.
Is the Airtac B06-ACQ Battery-Dedicated Cylinder B06-ACQ16X15SB the Right Cylinder?
When sizing this 16 mm bore actuator, consider stepping down to the 12 mm bore if your assembly requires less force (56.5 N push at 0.5 MPa) for delicate tab welding or handling. If your module-pack process demands greater thrust, the next size up is the 20 mm bore, which provides 157.1 N push at 0.5 MPa. Remember that a standard compact cylinder like this does not hold its position if air pressure drops or the valve is centered; the rod will drift, and the fixed bumper only decelerates it near the stroke end. For fail-safe load holding in vertical battery-handling stations, an external rod lock or pilot-operated check valve is required. To order, confirm your essentials: 16 mm bore, 15 mm stroke, M5x0.8 port, S magnet, and B male rod thread.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short-body depth vs. a round-body cylinder
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
- ✓ Side load — avoid on a compact rod
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the short piston rod.
- check Very long strokes are unsuitable for the compact body.
- check Handle the C-clip carefully; seat it fully in its groove.
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-ACQ Battery-Dedicated Cylinder B06-ACQ16X15SB FAQ
The 16 mm bore provides 100.5 N push and 75.4 N pull at 0.5 MPa, 140.8 N push at 0.7 MPa, and a maximum push of 21 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, handles speeds of 30-500 mm/s, and has a maximum standard stroke of 60 mm.
The B06- prefix simply marks this as AirTAC's battery-manufacturing dedicated variant of the ACQ16X15SB; it is mechanically identical to the base model. It does not have adjustable air cushions—it uses a fixed TPU elastomer bumper at each end to absorb the stop. For high-energy cycles, you should add an external shock absorber or slow the approach speed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-ACQ Battery-Dedicated Cylinder B06-ACQ16X15SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.