Airtac B52-SE Copper-Free ISO Standard Cylinder B52-SE100X450S
The AirTAC Airtac B52-SE Copper-Free ISO Standard Cylinder B52-SE100X450S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 450mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke450 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B52-SE Copper-Free ISO Standard Cylinder B52-SE100X450S
The B52-SE100X450S is AirTAC's copper-free (copper-prohibited) build of the SE100X450S, a double-acting single-rod ISO 15552 profile cylinder. The square extruded aluminum barrel has no external tie rods, making it compact and corrosion-resistant for flush mounting. With a 100mm bore, it delivers 3927 N push force at 0.5 MPa and 5497 N at 0.7 MPa.
The 'B52-' prefix indicates a copper-free construction for lines where copper and copper alloys are not permitted, such as ammonia systems and certain battery, electronics, and chemical plants. The built-in magnet (-S) works with CMSE reed or DMSE electronic sensors. The field-adjustable air cushion at both ends decelerates the piston near stroke end, softening hard stops at speed. Confirm exact material substitutions with us before ordering.
Airtac B52-SE Copper-Free ISO Standard Cylinder B52-SE100X450S Technical Specifications
| Model | Airtac B52-SE Copper-Free ISO Standard Cylinder B52-SE100X450S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B52-SE Copper-Free ISO Standard Cylinder B52-SE100X450S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac B52-SE Copper-Free ISO Standard Cylinder B52-SE100X450S Is Used
Ammonia Refrigeration Plant
In ammonia-based cooling systems where copper is strictly prohibited, this copper-free B52-SE100X450S actuates valve manifolds and damper linkages. Its 3927 N push at 0.5 MPa moves heavy control elements reliably, while the PT1/2 port handles the air supply for rapid cycling.
Battery Electrode Press
For battery manufacturing lines that ban copper alloys, this 100mm bore cylinder with 450mm stroke drives electrode laminating platens. The 5497 N push at 0.7 MPa provides the force to compress stacked electrode sheets, while the adjustable cushion prevents shock at full extension.
Chemical Dosing Skid
In chemical plants where copper contamination is a risk, this cylinder positions a 450mm-stroke dosing valve stem. The 3681 N pull at 0.5 MPa retracts the stem against process pressure. The copper-free build ensures no copper leaches into sensitive chemical streams.
Is the Airtac B52-SE Copper-Free ISO Standard Cylinder B52-SE100X450S the Right Cylinder?
At 100mm bore, the next bore down is 80mm with 2513 N push at 0.5 MPa, while the next bore up is 125mm with 6136 N push at 0.5 MPa. This 450mm stroke at 100mm bore with a 25mm rod and M20x1.5 thread carries moderate side loads, but for long unsupported strokes, use an external guide to prevent rod bending and bearing wear.
This cylinder is dimensionally interchangeable per ISO 15552 with other profile cylinders of the same bore and stroke. The port is PT1/2. For position sensing, order the -S magnet version with CMSE or DMSE sensors. The B52- prefix means copper-free construction-confirm the specific material substitutions with us if your application requires it.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac B52-SE Copper-Free ISO Standard Cylinder B52-SE100X450S FAQ
At 100mm bore, the B52-SE100X450S delivers 3927 N push and 3681 N pull at 0.5 MPa. At 0.7 MPa, push force is 5497 N. Maximum push is 801 kgf at 1.0 MPa. These figures apply to the standard SE100X450S and the copper-free B52- version shares the same dimensions and performance.
The B52- prefix marks AirTAC's copper-free (copper-prohibited) build of the SE100X450S. It is dimensionally interchangeable per ISO 15552 with other 100mm bore, 450mm stroke profile cylinders, so mounting hardware and footprint match. The exact material substitutions for copper parts are not specified in our data-confirm them with us for your specific application requirements.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B52-SE Copper-Free ISO Standard Cylinder B52-SE100X450S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.