Airtac MAC Stainless Steel Mini Air Cylinder MAC25X310SU
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC25X310SU is a genuine double acting + cushion standard round-body mini air cylinder with a Ø25mm bore and 310mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ25 mm
- Stroke310 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC25X310SU
Where a flush bolted face is needed, the MAC25X310SU answers with its U flat-end back cover and 310 mm of double-acting travel. AirTAC packs the stainless tube, aluminium covers and stainless block into a riveted round body that stays sealed through temperature swings from -20 to +70 C. Push force is 245.3 N at 0.5 MPa; budget roughly 147 N for real work, which lifts a 12 kg load vertically with a 2:1 safety margin.
Needle-valve cushioning at both ends lets you soften the long approach so a fast 800 mm/s return does not hammer the covers. The rod carries 20 um of hard chrome for wear life, and the built-in standard magnet means CMSG / DMSG / EMSG switches report position without special ordering.
Airtac MAC Stainless Steel Mini Air Cylinder MAC25X310SU Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC25X310SU |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 310 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC25X310SU
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×310 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC25X310SU Is Used
Stretch station on a film wrapper
Draws the film carriage across a 310 mm index on a pallet wrapper; cushioned ends stop the carriage without jolt at speed.
Press-feed pusher
Feeds blanks one at a time into a stamping press, delivering 147 N of working push against light friction guides.
Robotic gripper slide
Extends a pick head to a remote pick point beside a CNC lathe, with a DMSG switch confirming full extension via the standard magnet.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC25X310SU the Right Cylinder?
Step down to a 20 mm bore for 157.0 N at 0.5 MPa or up to a 32 mm bore for 402.2 N depending on the load. Across 310 mm of travel, off-axis forces can bend the 10 mm rod - keep the payload on linear guides. Air loss leaves the piston free to drift, so specify a rod lock or pilot check valve where a mid-stroke hold matters. The U cover mounts flush; add an FA flange or LB foot for rigid frames, or SDB for pivoting duty.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC25X310SU FAQ
Push 245.3 N, pull 206.1 N at 0.5 MPa; push 343.4 N, pull 288.5 N at 0.7 MPa; theoretical peak 50 kgf at 1.0 MPa. Pressure 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), stroke speed 30-800 mm/s, air filtered to 40 um.
Yes - variable air cushioning at both ends. Back the needle screws fully off at commissioning, then close them gradually until the 310 mm stroke ends softly. The cushion is not a brake: the piston still drifts without air pressure, so use a rod lock for holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC25X310SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.