Airtac MAC Stainless Steel Mini Air Cylinder MAC25X400SCA
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC25X400SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø25mm bore and 400mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ25 mm
- Stroke400 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC25X400SCA
Longer travel, same compact 25 mm bore: the MAC25X400SCA covers 400 mm in one stroke, pushing 245.3 N and pulling 206.1 N at 0.5 MPa. As a double-acting cushioned MAC, air does the work both ways while needle-adjustable cushions tame the stop at each end.
Rivet-packed stainless barrel, hard-chrome rod - so humidity, splashes and food-area washdowns are non-events for the body. Vertically the bore will lift about 25 kg on paper, so halve that and treat roughly 12 kg as a comfortable lift margin. The standard piston magnet accepts CMSG / DMSG / EMSG switches the day it arrives.
Airtac MAC Stainless Steel Mini Air Cylinder MAC25X400SCA Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC25X400SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 400 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC25X400SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC25X400SCA Is Used
Carton flap tucker
Folding tall-box flaps on a packing line; the 400 mm stroke clears a full carton height in one move.
Sampling lance on a mixing tank
Dipping a probe into an open vat - the pivot CA cover follows the arc of the swing arm.
Pick point on a light gantry
Lifting about 12 kg of jigs or parts vertically, sized with a 2:1 margin on the 25 kg theoretical column.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC25X400SCA the Right Cylinder?
If 245.3 N at 0.5 MPa is more than you need, the 20 mm bore still gives 157 N; if you want a bigger safety factor on a 400 mm travel, the 32 mm bore delivers 402.2 N. Long strokes amplify side load, so hang the load on its own linear guides and keep the rod straight. Because a plain MAC drifts when supply air stops, mount a pilot check valve or rod lock for any held position. The CA pivot cover pairs with an SDB pivot bracket; FA flange and LB foot suit fixed frames.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC25X400SCA FAQ
245.3 N push and 206.1 N pull at 0.5 MPa; 343.4 N push and 288.5 N pull at 0.7 MPa; 50 kgf theoretical maximum at 1.0 MPa. Running range is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, and speeds of 30-800 mm/s.
The MAC25X400SCA has variable air cushioning at both ends. On first run, back the needle screws fully open, cycle at low speed, then close them gradually until end-of-stroke shock disappears. Never tighten them fully shut, and remember the cushion only slows the piston near the ends - it is not a brake or position lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC25X400SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.