The AirTAC AirTAC MBL63X10SCA Mini Cylinder | 63mm Bore 10mm is a genuine double-acting aluminum-barrel mini round cylinder with a Ø63mm bore and 10mm stroke, G1/4 air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL63X10SCA is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces where high force and short motion are required. Operating at 0.5 MPa, it delivers a push force of 1558 N and a pull force of 1457 N. This 63 mm bore unit features a 10 mm stroke, making it highly effective for short clamping or ejection tasks. The riveted rolling-packed barrel keeps the body light and compact, though it is not designed to be disassembled like a tie-rod cylinder.
This specific SKU includes a built-in magnet (-S) for compatibility with AirTAC CMSG, DMSG, and EMSG sensor switches to track rod position. It is fitted with a CA pivot (clevis) back cover, allowing the cylinder to swing on a pin to accommodate arcing or angular loads. The carbon-steel piston rod features 20 um hard-chrome plating for wear and corrosion resistance, and the heterogeneous two-way piston seal retains grease for a long service life. End-of-stroke energy is absorbed by a fixed rubber bumper, not an adjustable air cushion.
| Model | AirTAC MBL63X10SCA Mini Cylinder | 63mm Bore 10mm |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø63 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 63 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Uses the 1558 N push force over a 10 mm stroke to knock small stamped metal parts out of a progressive die quickly.
Swings on its CA pivot clevis to secure electronic circuit boards during routing, absorbing angular load variations.
Provides the high force needed to fold heavy cardboard packaging flaps in tight conveyor side-rail clearances.
Choosing this 63 mm bore model provides 1558 N of push force at 0.5 MPa. If your application requires less force, step down to the 50 mm bore, which offers 981 N of push force at the same pressure. If you need higher dynamics or heavier moving masses at the end of the stroke, consider the MBLC variant, which replaces the fixed rubber bumper with an adjustable air cushion. For single-acting push or pull operations in the 20-40 mm bore range, look at the MSBL or MTBL series.
As a double-acting cylinder, this model does not hold its load if air pressure is lost or the valve is centered; the rod will drift or drop. If position holding is critical without live pressure, install an external rod lock or a pilot-operated check valve. This SKU features a PT tapered port thread, a G1/4 port size, an M14x1.5 rod-end thread, and a CA pivot back cover.
Quick checklist
At 0.5 MPa, the push force is 1558 N and the pull force is 1457 N. At 0.7 MPa, the push force is 2181 N. The maximum theoretical force is 318 kgf at 1.0 MPa.
No. The base MBL uses a fixed rubber bumper to soften the end-of-stroke impact and does not have an adjustable cushion screw. If you need adjustable air cushioning for heavier loads, select the MBLC variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.