The AirTAC AirTAC MBL63X160SU Mini Cylinder | 63mm Bore 160mm Stroke is a genuine double-acting aluminum-barrel mini round cylinder with a Ø63mm bore and 160mm stroke, G1/4 air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL63X160SU is a compact double-acting aluminum mini round cylinder engineered to deliver substantial thrust in tight machine spaces. At 0.5 MPa, this 63mm bore unit generates 1558N of push force and 1457N of pull force, making it well-suited for rigidly driving heavy 160mm strokes. The riveted rolling-packed barrel keeps the body light and small, though it is not designed to be disassembled like a tie-rod cylinder.
This specific SKU features a U flat-end back cover for rigid fixed mounting and includes a built-in magnet (-S) for position detection. The carbon-steel piston rod utilizes a 20µm hard-chrome plating for high wear and corrosion resistance, paired with a heterogeneous two-way piston seal that retains grease for long service life. It is a genuine AirTAC component built for demanding, space-constrained automation.
| Model | AirTAC MBL63X160SU Mini Cylinder | 63mm Bore 160mm Stroke |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø63 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 63 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Drives heavy plastic parts out of tight mold tooling spaces, utilizing the 1558N push force to break the vacuum and eject components reliably over a 160mm travel distance.
Actuates a heavy-duty diverter mechanism on a packaging line, where the compact aluminum body fits between conveyor rollers and the U flat-end cover provides rigid structural support.
Secures heavy circuit board handling trays during high-speed routing, using the -S magnet with a DMSG solid-state sensor to confirm clamp engagement before processing begins.
Stepping down to the 50mm bore neighbor reduces the push force to 981N at 0.5 MPa, whereas stepping up is not an option as 63mm is the largest standard MBL size. Choose the MBLC variant if your cycle speed requires an adjustable air cushion to soften end-of-stroke impacts, as the base MBL relies solely on a fixed rubber bumper. If the application requires single-acting spring-return motion, consider the MSBL or MTBL series (available in 20-40mm bores).
This MBL63X160SU configuration specifies a 63mm bore, 160mm stroke, G1/4 port, PT thread form, U flat-end back cover, and a built-in magnet for CMSG, DMSG, or EMSG sensor switches. Because the stroke is 160mm, the unsupported Ø16mm rod is susceptible to bending under side loads; utilizing an external guide or a pivot mounting accessory is recommended to prevent premature seal wear.
Quick checklist
At 0.5 MPa, the push force is 1558N and the pull force is 1457N. At 0.7 MPa, the push force increases to 2181N. The maximum theoretical force is 318 kgf when operated at the maximum 1.0 MPa pressure.
No, the base MBL63X160SU uses a fixed rubber bumper to soften end-of-stroke impacts and does not feature an adjustable cushion screw. If your application requires adjustable air cushioning for heavier or faster moving loads, you must upgrade to the MBLC variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.