Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X10CA
The AirTAC Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X10CA is a genuine double-acting aluminum-barrel mini round cylinder with a Ø63mm bore and 10mm stroke, G1/4 air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
- BoreØ63 mm
- Stroke10 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM14×1.5
- CushionRubber bumper (MBLC variant: adjustable air cushion)
About the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X10CA
The AirTAC MBLC63X10CA is a compact double-acting aluminum mini cylinder engineered for short, high-force arcing movements. It utilizes a built-in adjustable air cushion at both stroke ends to smoothly decelerate the piston, cutting end-cover impact and vibration on heavy loads. Operating at 0.5 MPa, it generates 1558 N of push force and 1457 N of pull force, peaking at a theoretical 318 kgf at 1.0 MPa. The 10 mm stroke is ideal for very short clamping or ejection tasks.
This SKU features a CA pivot clevis back cover that swings on a pin to accommodate angular side loads. It uses a Ø16 mm hard-chrome carbon-steel rod with a heterogeneous two-way grease-retaining piston seal for lasting lubrication. Note that because this configuration lacks the -S suffix, it has no built-in magnet and cannot support CMSG, DMSG, or EMSG position sensors. The riveted rolling-packed aluminum barrel keeps the body light and compact for tight machinery spaces.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X10CA Technical Specifications
| Model | Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X10CA |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø63 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X10CA
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 63 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Where the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X10CA Is Used
Stamping Press Ejection
Uses the 1558 N push force at 0.5 MPa to knock heavy stamped metal blanks out of a die in a fraction of a second.
Pallet Diverter Arm
Leverages the CA pivot clevis to swing a heavy diverter gate across a conveyor belt, absorbing the angular side-load.
Heavy Carton Flap Folder
Employs the 10 mm stroke for rapid, short-arc folding of thick corrugated carton flaps in high-speed packaging lines.
Is the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X10CA the Right Cylinder?
Choose this 63 mm bore when you need maximum mini-cylinder thrust in a compact footprint. If 1558 N of push at 0.5 MPa is excessive for your short-stroke task, step down to the 50 mm bore, which supplies 981 N. Conversely, if you require even more force, this is the largest available bore in the MBL/MBLC family, so you would need to transition to a larger ISO 15552 profile cylinder. The CA pivot back cover is specifically selected here to safely absorb arcing loads that would shear a rigid flat-end U mount.
Select the MBLC over the fixed-bumper MBL when your short, heavy moves cycle quickly and the standard rubber bumper cannot adequately absorb the kinetic energy. Remember that the adjustable air cushion only decelerates the piston near the stroke ends; it is not a brake and will not hold a load if air pressure drops. For exact drop-in replacement matching, specify bore 63, stroke 10, port PT, rod thread M14x1.5, and the CA clevis back cover.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X10CA FAQ
At 0.5 MPa, this 63 mm bore cylinder provides 1558 N of push force and 1457 N of pull force. At 0.7 MPa, the push force reaches 2181 N, with a maximum theoretical output of 318 kgf at 1.0 MPa. It uses a G1/4 port and an M14x1.5 rod-end thread.
A screw-tunable needle at both ends traps a pocket of exhaust air to smoothly decelerate the piston before it hits the end cover. You tune the needle to match your load and speed, which is critical for a heavy 63 mm bore moving rapidly. This cushion only dampens end-of-stroke motion; it is not a lock or brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X10CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.