Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X200CA
The AirTAC Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X200CA is a genuine double-acting aluminum-barrel mini round cylinder with a Ø63mm bore and 200mm stroke, G1/4 air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
- BoreØ63 mm
- Stroke200 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM14×1.5
- CushionRubber bumper (MBLC variant: adjustable air cushion)
About the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X200CA
The AirTAC MBLC63X200CA is a compact double-acting aluminum mini cylinder engineered for heavy-duty small-part manipulation. It delivers a substantial 1558 N push force and 1457 N pull force at 0.5 MPa, making this 63 mm bore variant the powerhouse of the MBL family. Driven by air filtered to 40 um across a 0.15-1.0 MPa operating range, it handles rapid 30-800 mm/s cycling. The 200 mm stroke suits extended indexing or heavy lifting tasks.
Unlike the base MBL fixed bumper, this MBLC model features a screw-adjustable pneumatic air cushion at both ends. You tune the needle to smoothly decelerate the piston near stroke extremes, absorbing kinetic energy to protect the end covers on fast, high-mass moves. The riveted rolling-packed aluminum barrel keeps the body light and compact for tight spaces, while the heterogeneous two-way grease-retaining piston seal ensures lasting lubrication. The Ø16 carbon-steel rod features 20 um hard-chrome plating for wear resistance.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X200CA Technical Specifications
| Model | Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X200CA |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X200CA
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Where the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X200CA Is Used
Injection Mold Extraction
Provides the 1558 N push force at 0.5 MPa needed to positively eject dense plastic parts from injection molds, using the 200 mm stroke to clear the press platen safely.
Pallet Diverting Arm
Drives a heavy diverter arm on a packaging conveyor, where the CA pivot cover absorbs the angular swing arc and the adjustable cushion halts the 200 mm travel smoothly.
Tiered Carton Pushing
Indexes stacked corrugated cardboard cartons between roller tiers, relying on the tunable end-cushions to prevent soft package crushing at high cycle rates.
Is the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X200CA the Right Cylinder?
As the largest standard bore, stepping down means the 50 mm bore, which yields 981 N push at 0.5 MPa. There is no larger MBL bore; for forces beyond 318 kgf at 1.0 MPa, consider a different cylinder family entirely. Choose this MBLC over the base MBL when moving heavy masses at high speeds where a fixed rubber bumper would degrade or fail. Note that the CA pivot back cover swings on a pin to accommodate arcing angular loads, making it superior to the rigid U flat-end cover for traversing mechanisms. Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG position sensors. Furthermore, the air cushion only decelerates near the ends; it is not a brake, and the rod will drift if air is lost or the valve centers. For position holding without live air, install an external rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X200CA FAQ
At 0.5 MPa it provides 1558 N push and 1457 N pull force. At 0.7 MPa, push increases to 2181 N. The maximum theoretical force is 318 kgf at 1.0 MPa. It uses a G1/4 port and an M14x1.5 rod-end thread.
No. This specific SKU lacks the built-in -S magnet, meaning CMSG reed switches or DMSG/EMSG solid-state sensors cannot detect the rod position. You would need the MBLC63X200CAS variant for sensor compatibility.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X200CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.