Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X30SCA
The AirTAC Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X30SCA is a genuine double-acting aluminum-barrel mini round cylinder with a Ø63mm bore and 30mm stroke, G1/4 air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
- BoreØ63 mm
- Stroke30 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM14×1.5
- CushionRubber bumper (MBLC variant: adjustable air cushion)
About the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X30SCA
The AirTAC MBLC63X30SCA is a compact double-acting aluminum mini cylinder engineered for high-force, short-stroke automation. It delivers a robust 1558 N push and 1457 N pull force at 0.5 MPa, making it ideal for heavy pressing or clamping tasks within confined spaces. A built-in magnet (-S) enables position detection via CMSG, DMSG, or EMSG sensor switches. The riveted rolling-packed aluminum barrel keeps the body light and compact, avoiding the bulk of traditional tie-rod builds.
This SKU features a CA pivot (clevis) back cover that swings on a pin to safely accommodate arcing or angular loads. Unlike the base MBL which relies on a fixed rubber bumper, this MBLC variant incorporates a screw-tunable pneumatic air cushion at both ends. You adjust the needle to smoothly decelerate the heavy 63 mm piston near the 30 mm stroke ends, minimizing impact shock and protecting the end covers on rapid cycles.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X30SCA Technical Specifications
| Model | Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X30SCA |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø63 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X30SCA
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 63 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Where the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X30SCA Is Used
Metal Stamping Ejector
Uses the 1558 N push force to knock heavy stamped sheet metal parts out of a die in a short 30 mm stroke, relying on the cushion to absorb the sudden mass impact.
Pallet Diverter Arm
Leverages the CA pivot back cover to swing a heavy diverter gate on a packaging conveyor, handling angular linkage loads without binding.
PCB Test Press
Applies precise downward pressure on an in-circuit test fixture, using the -S magnet with a DMSG solid-state sensor to confirm the press is fully home.
Is the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X30SCA the Right Cylinder?
Choose this 63 mm bore for heavy-duty compact tasks requiring 1558 N of push force at 0.5 MPa. If your application is lighter, stepping down to the 50 mm bore yields 981 N of push force, saving space and air consumption. If you need even more power, 63 mm is the largest standard MBL/MBLC size available, so for higher loads you must switch to a larger ISO 15552 profile cylinder. The short 30 mm stroke keeps side-load bending leverage minimal, but the CA pivot is specifically beneficial if your linkage geometry creates angular motion.
Select the MBLC over the base MBL when operating at high speeds or moving heavy masses where a fixed rubber bumper would deteriorate rapidly from impact. Remember that the adjustable air cushion only decelerates the piston near the end of travel; it is not a mechanical lock. If you need to hold position vertically without constant air pressure, you must add an external pilot-operated check valve or a dedicated rod lock. Replacement parts require matching the 63 mm bore, 30 mm stroke, G1/4 port, PT thread, CA pivot, and -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X30SCA FAQ
At 0.5 MPa it provides 1558 N push and 1457 N pull. At 0.7 MPa it provides 2181 N push, with a theoretical maximum of 318 kgf at 1.0 MPa. The port size is G1/4, the rod is Ø16 mm, and the rod-end thread is M14x1.5.
The screw-tunable pneumatic cushion at both ends allows you to dial in the deceleration rate of the heavy 63 mm piston. This prevents the end covers from cracking under high kinetic energy during fast cycles, a failure mode common to fixed rubber bumpers. It decelerates the load smoothly but does not lock the rod in place.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X30SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.