Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X350CA
The AirTAC Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X350CA is a genuine double-acting aluminum-barrel mini round cylinder with a Ø63mm bore and 350mm stroke, G1/4 air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
- BoreØ63 mm
- Stroke350 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM14×1.5
- CushionRubber bumper (MBLC variant: adjustable air cushion)
About the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X350CA
The AirTAC MBLC63X350CA is a double-acting aluminum mini cylinder engineered for substantial linear force, delivering 1558 N of push and 1457 N of pull at 0.5 MPa. Its 350 mm stroke suits extended-travel material routing or large gate actuation. Unlike the base MBL series which relies on a fixed rubber bumper, this MBLC variant features a screw-adjustable pneumatic air cushion at both ends. Tuning the cushion needle lets you smoothly decelerate the heavy 63 mm piston near the stroke limits, effectively damping end-cover impact without acting as a mechanical lock.
This configuration utilizes a CA pivot back cover that swings on a pin to accommodate arcing loads, paired with a robust Ø16 mm carbon-steel rod plated with 20 µm hard chrome to resist scoring. The riveted rolling-packed aluminum barrel keeps the assembly light and compact for its size class. Because this specific SKU lacks the -S suffix, it is built without a magnet and cannot host a CMSG, DMSG, or EMSG position sensor.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X350CA Technical Specifications
| Model | Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X350CA |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø63 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X350CA
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 63 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Where the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X350CA Is Used
Pallet Diverter Arms
Drives heavy swinging diverter gates on packaging lines, using the 350 mm stroke and CA pivot to re-route loaded pallets smoothly without end-cap slamming.
CNC Lathe Bar Feeders
Actuates long guide tubes for bar stock pushers where the 1558 N force at 0.5 MPa ensures consistent stock delivery into the spindle over extended distances.
Industrial Warehouse Doors
Opens and closes tall safety access panels on automated storage systems, relying on the tunable air cushion to decelerate the heavy door mass safely at travel limits.
Is the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X350CA the Right Cylinder?
Selecting the MBLC63X350CA is optimal when your application requires the maximum thrust available in this frame size, pushing 318 kgf theoretically at 1.0 MPa. If you need less force, stepping down to the 50 mm bore drops the 0.5 MPa push to 981 N, while the 63 mm bore is the largest available in this series with no larger neighbor. The PT tapered port threads mate directly with standard pneumatic fittings.
At a 350 mm stroke, the 16 mm rod is highly susceptible to side-loading and bending forces. The CA clevis back cover on this unit helps mitigate this by allowing the cylinder to pivot during the stroke, but you should still employ an external guide rail or consider a double-rod MBLCD type to prevent premature seal wear. Remember that the adjustable air cushion only decelerates the piston near the ends; it will not hold the load in place if air pressure is lost or the valve centers.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X350CA FAQ
This 63 mm bore cylinder uses a G1/4 port and a Ø16 mm rod with an M14x1.5 thread. At 0.5 MPa it provides 1558 N push and 1457 N pull. At 0.7 MPa, push increases to 2181 N. The maximum theoretical force is 318 kgf at 1.0 MPa.
No, this specific SKU lacks the -S suffix, meaning it is manufactured without a built-in magnet. You must select an MBLC63X350CAS model if you need to mount CMSG reed or DMSG/EMSG electronic sensor switches for rod position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X350CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.