Airtac MF32-40 Stainless Steel Mini Cylinder MF32X175SCM
The AirTAC Airtac MF32-40 Stainless Steel Mini Cylinder MF32X175SCM is a genuine double acting JIS-standard round-body mini air cylinder with a Ø32mm bore and 175mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke175 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X175SCM
Delivering 402.2 N of push force at 0.5 MPa, the AirTAC MF32X175SCM is a double-acting JIS-standard round-body mini cylinder built around a SUS304 stainless steel barrel. The 32 mm bore uses a 1/4 inch port and an M10x1.25 male rod thread. Because this riveted rolling-packed design is physically shorter than an ISO 6432 cylinder for the same 175 mm stroke, it drops neatly into tight machinery frames. The aluminium covers and stainless tube resist mild corrosion and washdown, while the piston's two-way seal retains an oil film for long service life.
For practical sizing, plan for roughly 241 N of actual work at 0.5 MPa, which translates to lifting about 20.5 kg vertically with a 2:1 safety margin. Fixed TPU bumper pads and a front-cover anti-impact pad soften the stroke-end impact by decelerating the piston. This specific SKU includes a built-in magnet for position sensing and features a CM round-end rear cover.
Airtac MF32-40 Stainless Steel Mini Cylinder MF32X175SCM Technical Specifications
| Model | Airtac MF32-40 Stainless Steel Mini Cylinder MF32X175SCM |
|---|---|
| Series | MF JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MF32-40 Stainless Steel Mini Cylinder MF32X175SCM
| MF | JIS-standard round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X175SCM Is Used
Package Diverting
Pushes cartons onto secondary packaging lines using 402.2 N of thrust, where the shorter JIS body keeps the conveyor frame clear.
Clamp Actuation
Secures aluminium extrusions during CNC milling, using the roughly 241 N safe working load to hold parts against cutting forces.
Vertical Lifting
Raises lightweight tote bins weighing up to 20.5 kg in sorting hubs, relying on the CM round-end cover for pivot mounting.
Is the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X175SCM the Right Cylinder?
When sizing this 32 mm bore, the adjacent MF25 provides 245.3 N of push at 0.5 MPa, while stepping up to the MF40 yields 628.3 N. If your air supply drops or the valve centres, the piston will drift because the bumper pads only decelerate the end of travel rather than locking the rod. To hold a suspended load securely, fit an external rod lock or a pilot-operated check valve. The integrated magnet allows CMSG, DMSG, or EMSG switches to track position. Mounting options include LB foot, FA flange, SDB pivot, and TC trunnion, complementing the CM round-end back cover. At 175 mm, ensure your guiding structure handles any side-load to prevent rod bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MF32-40 Stainless Steel Mini Cylinder MF32X175SCM FAQ
This 32 mm bore double-acting cylinder pushes with 402.2 N and pulls with 345.6 N at 0.5 MPa. At 0.7 MPa, push is 563 N and pull is 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa. It uses a 1/4 inch air port and an M10x1.25 male rod thread.
No, the base MF relies on fixed TPU bumper pads that decelerate the stroke end but do not offer adjustable cushioning. For variable cushioning, look at the MFC variant. Additionally, this MF32X175SCM features a SUS304 stainless barrel that is shorter than an ISO 6432 cylinder, and it includes a magnet for CMSG/DMSG/EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MF32-40 Stainless Steel Mini Cylinder MF32X175SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.