Airtac MF32-40 Stainless Steel Mini Cylinder MF32X190SCA
The AirTAC Airtac MF32-40 Stainless Steel Mini Cylinder MF32X190SCA is a genuine double acting JIS-standard round-body mini air cylinder with a Ø32mm bore and 190mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke190 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X190SCA
Generating 402.2 N of push force at 0.5 MPa, this double-acting JIS-standard round-body mini cylinder handles robust mid-range automation tasks. Its SUS304 stainless barrel and riveted aluminium covers resist mild corrosion and washdown environments. The piston relies on a two-way oil-retaining seal for prolonged lifespan, while fixed TPU bumper pads decelerate the stroke ends.
Because the MF body is physically shorter than a comparable ISO 6432 cylinder for the same 190 mm stroke, it saves valuable mounting length in tight fixtures. The integrated -S magnet allows direct mounting of CMSG, DMSG, or EMSG switches for position sensing. Plan for a safe working load of roughly 241 N, which vertically lifts about 20.5 kg with a 2:1 safety margin. The 1/4 inch port matches the 32 mm bore standard.
Airtac MF32-40 Stainless Steel Mini Cylinder MF32X190SCA Technical Specifications
| Model | Airtac MF32-40 Stainless Steel Mini Cylinder MF32X190SCA |
|---|---|
| Series | MF JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MF32-40 Stainless Steel Mini Cylinder MF32X190SCA
| MF | JIS-standard round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X190SCA Is Used
Gate Divert Actuation
Drives a pivot gate on a packaging conveyor, using the CA rear pivot to articulate smoothly while handling the 402.2 N push requirement at 0.5 MPa.
Carton Push-off Station
Ejects filled corrugated cartons from a roller table, where the compact JIS body saves footprint and the built-in magnet confirms the 190 mm stroke end.
Pallet Stopper Arm
Raises and lowers a physical stop block for incoming pallets, relying on the SUS304 barrel to endure occasional washdown spray in food logistics.
Is the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X190SCA the Right Cylinder?
If your task requires less push, the MF25 bore provides 245.3 N at 0.5 MPa; stepping up to the MF40 yields 628.3 N for heavier cycles. The included CA pivot back cover suits articulated rod-end loads, complemented by LB, FA, SDB, or TC mounts. Because the 190 mm stroke is well under the 500 mm standard maximum, side-load rod bending is minimal but still demands straight alignment.
Remember that a plain cylinder drifts when air is lost or the valve is centred. The TPU bumpers only soften the stroke end and never act as a lock or brake. To suspend a load securely, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MF32-40 Stainless Steel Mini Cylinder MF32X190SCA FAQ
This 32 mm bore double-acting cylinder features a 1/4 inch port and an M10x1.25 male rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa.
No, the fixed TPU bumper pads only decelerate the piston near the stroke end and do not function as a brake. If air is lost, the rod will drift. For vertical loads, add an external rod lock or pilot check valve. The -S magnet enables CMSG, DMSG, or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MF32-40 Stainless Steel Mini Cylinder MF32X190SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.