Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200SCA
The AirTAC Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200SCA is a genuine double acting JIS-standard round-body mini air cylinder with a Ø32mm bore and 200mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke200 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200SCA
Delivering 402.2 N of push force at 0.5 MPa, this double-acting 32 mm bore JIS-standard round-body cylinder provides a 200 mm stroke. Its SUS304 stainless-steel barrel and riveted aluminium covers resist mild corrosion and washdown, while the two-way piston seal retains an oil film for extended operational life. The body is notably shorter than an ISO 6432 cylinder of the same bore and stroke, offering a real packaging advantage in tight machinery.
Because the 0.5 MPa push rating translates to roughly 241 N of practical work, you can expect this actuator to lift about 20.5 kg vertically with a 2:1 safety margin. It features a 1/4" air port, an M10x1.25 male rod thread, and fixed TPU bumper pads that soften stroke-end impact. The CA rear pivot cover allows direct angular alignment, and the built-in -S magnet supports CMSG, DMSG, or EMSG position switches.
Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200SCA Technical Specifications
| Model | Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200SCA |
|---|---|
| Series | MF JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200SCA
| MF | JIS-standard round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200SCA Is Used
Pivot-Arm Actuation
Leverages the CA rear pivot to swing a 200 mm arm during automated component loading, using the 402.2 N output to push parts into a machining fixture.
Transfer Line Diverter
Employs the integrated magnet and CMSG switches to confirm stroke position while deflecting packages on a washdown-resistant stainless-steel assembly line.
Vertical Part Elevation
Lifts approximately 20.5 kg trays vertically between conveyor tiers, relying on the compact JIS body length to fit within restrictive elevator shaft spaces.
Is the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200SCA the Right Cylinder?
When sizing this 32 mm bore actuator, stepping down to the MF25 reduces the 0.5 MPa push force to 245.3 N, whereas stepping up to the MF40 increases it to 628.3 N. If your application requires the load to remain suspended or fixed during a loss of air supply or valve centring, this standard cylinder will drift; you should integrate an external rod lock or a pilot-operated check valve to secure the payload.
The CA back cover provides a pivot mount for articulating loads, while the integrated magnet allows seamless sensor placement. For a 200 mm stroke, ensure the rod end is guided to prevent side-loading and premature rod-bending wear. The fixed TPU bumpers decelerate the piston at the stroke ends, but for high-cycle automated tasks demanding variable cushioning, consider the MFC variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200SCA FAQ
This 32 mm bore double-acting cylinder uses a 1/4" air port and an M10x1.25 male rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum force of 82 kgf at 1.0 MPa.
The CA back cover provides a pivot pin for angular mounting flexibility. At the stroke extremes, fixed TPU bumper pads and a front-cover anti-impact pad decelerate the piston to reduce shock. Note that these bumpers do not lock the load; if air is lost, the rod will drift.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.