Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200SCM
The AirTAC Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200SCM is a genuine double acting JIS-standard round-body mini air cylinder with a Ø32mm bore and 200mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke200 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200SCM
Delivering 402.2 N of push force at 0.5 MPa, this double-acting 32 mm bore JIS-standard round-body cylinder integrates a piston magnet and a CM round-end rear cover. Its SUS304 stainless steel barrel and riveted rolling-packed aluminium covers resist mild corrosion and washdown environments. The piston relies on a heterogeneous two-way seal that retains an oil film for extended lifespan, while fixed TPU bumper pads and a front-cover anti-impact pad soften stroke-end impacts.
For the same 32 mm bore and 200 mm stroke, the MF body is physically shorter than an ISO 6432 cylinder, providing a tangible packaging advantage in tight machinery. Plan for about 241 N of actual work at 0.5 MPa, which safely accounts for friction and real-world dynamics. Alternatively, you can expect it to lift roughly 20.5 kg vertically with a 2:1 safety margin. The 1/4" port feeds the 12 mm rod to cycle at 30-800 mm/s.
Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200SCM Technical Specifications
| Model | Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200SCM |
|---|---|
| Series | MF JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200SCM
| MF | JIS-standard round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200SCM Is Used
Carton Diverting Gate
Actuates a routing flap on a packaging line, using the 402.2 N push force to redirect heavy cardboard cartons at high cycling speeds.
Parts Ejection Press
Pushes stamped metal components out of a die bed, leveraging the 200 mm stroke to clear the press bed before the next cycle begins.
Pallet Stopper Arm
Deploys a mechanical stop block to halt incoming pallets on a gravity roller conveyor, securely handling loads up to 20.5 kg vertically.
Is the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200SCM the Right Cylinder?
When sizing this actuator, stepping down to the MF25 yields 245.3 N of push at 0.5 MPa, whereas stepping up to the MF40 provides 628.3 N. The built-in -S magnet enables direct mounting of CMSG, DMSG, or EMSG electronic switches for position sensing. Because the CM rear cover is round-ended, ensure your pivot or clevis mount accommodates this profile. At 200 mm of travel, verify your guiding geometry to prevent rod side-loading and premature seal wear.
Remember that the fixed TPU bumpers only decelerate the piston near the stroke end; they do not function as an adjustable air cushion. If your process requires the load to remain stationary upon air loss or valve centering, this cylinder will drift. You must integrate an external rod lock or a pilot-operated check valve to hold the payload securely in place.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200SCM FAQ
This 32 mm bore double-acting cylinder features a 1/4" air port and an M10x1.25 male rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, increasing to 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
For an equivalent 32 mm bore and 200 mm stroke, this JIS-standard round-body cylinder is shorter than an ISO 6432 unit, saving valuable mounting length. It uses fixed TPU bumper pads to decelerate the stroke end rather than an adjustable air cushion. The SUS304 stainless barrel provides washdown resistance, and the included magnet supports CMSG/DMSG/EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MF32-40 Stainless Steel Mini Cylinder MF32X200SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.