Airtac MF32-40 Stainless Steel Mini Cylinder MF32X30SU
The AirTAC Airtac MF32-40 Stainless Steel Mini Cylinder MF32X30SU is a genuine double acting JIS-standard round-body mini air cylinder with a Ø32mm bore and 30mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke30 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X30SU
Delivering 402.2 N of push force at 0.5 MPa, the AirTAC MF32X30SU is a 32 mm bore double-acting JIS-standard round-body mini cylinder. Because its SUS304 stainless barrel and riveted aluminium covers form a shorter physical envelope than a comparable ISO 6432 unit, it slots neatly into tight machinery where every millimetre of mounting length matters. The integrated piston magnet allows direct mounting of CMSG, DMSG, or EMSG switches for position sensing.
The internal piston relies on a heterogeneous two-way seal that retains an oil film for extended lifespan, while fixed TPU bumper pads and a front-cover anti-impact pad absorb stroke-end shock. Plan for a safe working load of roughly 241 N, which represents about sixty percent of the 0.5 MPa push rating. Alternatively, it can vertically lift around 20.5 kg with a 2:1 safety margin, letting you match real part weights accurately.
Airtac MF32-40 Stainless Steel Mini Cylinder MF32X30SU Technical Specifications
| Model | Airtac MF32-40 Stainless Steel Mini Cylinder MF32X30SU |
|---|---|
| Series | MF JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MF32-40 Stainless Steel Mini Cylinder MF32X30SU
| MF | JIS-standard round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X30SU Is Used
Short-Stroke Clamping
Ideal for locking aluminium extrusions in a machining fixture, using the 30 mm stroke to rapidly secure parts against a stop.
Package Diverting
Pushes small cardboard cartons off a sorting line with 402.2 N of force, fitting neatly into tight transfer gaps.
Component Insertion
Presses bearings into housings on an assembly carousel, relying on the built-in magnet to confirm the insertion depth.
Is the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X30SU the Right Cylinder?
When sizing this 32 mm bore, stepping down to an MF25 yields 245.3 N of push at 0.5 MPa, whereas stepping up to an MF40 provides 628.3 N. The MF32X30SU features a 1/4" port, an M10x1.25 male rod thread, and a flat-end U back cover. The short 30 mm stroke keeps rod bending stress minimal, but ensure your guiding structure handles any lateral loads.
Remember that the fixed TPU bumpers only decelerate the piston near the stroke ends and do not function as a braking mechanism. If your fixture must remain suspended during a loss of air supply or when a valve is centred, the rod will drift, meaning you must incorporate an external pilot-operated check valve or a dedicated rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MF32-40 Stainless Steel Mini Cylinder MF32X30SU FAQ
The 32 mm bore uses a 1/4" port and an M10x1.25 male rod thread. At 0.5 MPa it pushes 402.2 N and pulls 345.6 N. At 0.7 MPa it pushes 563 N and pulls 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa.
It is a JIS-standard round-body cylinder that is physically shorter than an ISO 6432 model of the same bore and stroke, saving mounting length. It uses fixed TPU bumper pads to decelerate the stroke end rather than an adjustable air cushion, and its SUS304 stainless barrel resists mild corrosion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MF32-40 Stainless Steel Mini Cylinder MF32X30SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.