Airtac MF32-40 Stainless Steel Mini Cylinder MF32X50SU
The AirTAC Airtac MF32-40 Stainless Steel Mini Cylinder MF32X50SU is a genuine double acting JIS-standard round-body mini air cylinder with a Ø32mm bore and 50mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke50 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X50SU
Delivering 402.2 N of push force at 0.5 MPa, this double-acting 32 mm bore cylinder handles substantial work in a compact footprint. Because the JIS-standard round body is physically shorter than a comparable ISO 6432 unit for the same 50 mm stroke, it fits tighter machinery frames. The SUS304 stainless steel barrel and riveted aluminium covers resist mild corrosion, while the piston's two-way seal retains an oil film for long service life.
The built-in piston magnet (-S) supports CMSG, DMSG, and EMSG switches for position sensing, and the flat-end U back cover mounts flush against bulkheads. Fixed TPU bumper pads soften stroke-end impact. For reliable actuation, plan for roughly 241 N of actual work at 0.5 MPa, which translates to lifting about 20.5 kg vertically with a 2:1 safety margin.
Airtac MF32-40 Stainless Steel Mini Cylinder MF32X50SU Technical Specifications
| Model | Airtac MF32-40 Stainless Steel Mini Cylinder MF32X50SU |
|---|---|
| Series | MF JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MF32-40 Stainless Steel Mini Cylinder MF32X50SU
| MF | JIS-standard round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X50SU Is Used
Clamping Machined Parts
Holds aluminium housings securely during CNC milling operations using the 402.2 N push force at 0.5 MPa.
Package Diverting
Extends 50 mm to push medium-weight cardboard cartons off a main sorting line into secondary packing lanes.
Pallet Stop Gate
Acts as a pneumatic stop for incoming pallets on a roller conveyor, using the flat-end U cover to absorb rear impact.
Is the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X50SU the Right Cylinder?
When sizing this 32 mm bore, stepping down to the MF25 yields 245.3 N at 0.5 MPa, whereas moving up to the MF40 provides 628.3 N. If your process drops air pressure or the valve centres, this cylinder cannot hold its load and the piston will drift; the bumpers only decelerate the end of travel. Secure a suspended load using an external rod lock or a pilot-operated check valve. The 1/4" port and M10x1.25 male rod thread match standard pneumatic manifolds. With a 50 mm stroke, side-load stress on the 12 mm rod is minimal, but ensure front mounting alignment to prevent binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MF32-40 Stainless Steel Mini Cylinder MF32X50SU FAQ
At 0.5 MPa it pushes with 402.2 N and pulls with 345.6 N. At 0.7 MPa it pushes 563 N and pulls 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa. This 32 mm bore cylinder uses a 1/4" air port and an M10x1.25 male rod thread.
Yes, the -S suffix indicates a built-in magnet compatible with CMSG, DMSG, and EMSG switches. Structurally, the JIS-standard SUS304 stainless round body with riveted covers is shorter than an ISO 6432 cylinder of the same bore and stroke, saving mounting length. It uses fixed TPU bumper pads rather than an adjustable air cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MF32-40 Stainless Steel Mini Cylinder MF32X50SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.