Airtac MF32-40 Stainless Steel Mini Cylinder MF32X600SCA
The AirTAC Airtac MF32-40 Stainless Steel Mini Cylinder MF32X600SCA is a genuine double acting JIS-standard round-body mini air cylinder with a Ø32mm bore and 600mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke600 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X600SCA
Delivering 402.2 N of push force at 0.5 MPa, this double-acting JIS-standard round-body mini cylinder handles substantial work within a compact footprint. Because the SUS304 stainless-steel barrel and riveted aluminium covers yield a body shorter than a comparable ISO 6432 unit, you save valuable mounting length on your machinery. The 600 mm stroke specified here exceeds the 500 mm standard maximum, making this a non-standard, made-to-order configuration.
The piston relies on a heterogeneous two-way seal that retains an oil film for prolonged lifespan, while fixed TPU bumper pads and a front-cover anti-impact pad soften end-of-stroke impacts. Equipped with a built-in magnet (-S) and a CA pivot back cover, it accepts CMSG, DMSG, or EMSG switches. For practical sizing, plan for roughly 241 N of usable work at 0.5 MPa, which equates to lifting about 20.5 kg vertically with a 2:1 safety margin. Air connects via a 1/4" port.
Airtac MF32-40 Stainless Steel Mini Cylinder MF32X600SCA Technical Specifications
| Model | Airtac MF32-40 Stainless Steel Mini Cylinder MF32X600SCA |
|---|---|
| Series | MF JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MF32-40 Stainless Steel Mini Cylinder MF32X600SCA
| MF | JIS-standard round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X600SCA Is Used
Diverting Heavy Cartons
Pushes heavy packaged goods across a transfer section with 402.2 N of force at 0.5 MPa, using the 600 mm travel to clear wide multi-lane conveyor belts.
Automated Textile Loom
Actuates a large-format weaving or knitting frame where the CA pivot mount accommodates articulation and the SUS304 barrel withstands humid production environments.
High-Bay Tray Extraction
Extracts storage trays from deep racking, leveraging the extended 600 mm stroke while the shorter JIS body saves critical longitudinal space in tight aisles.
Is the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X600SCA the Right Cylinder?
When sizing this 32 mm bore, compare it directly against its neighbours: the MF25 provides 245.3 N of push at 0.5 MPa if your load is lighter, while the MF40 steps up to 628.3 N for heavier demands. Because this 600 mm travel length is a non-standard made-to-order stroke that exceeds the 500 mm catalog maximum, carefully evaluate side-loading forces to prevent rod bending over such an extended extension. Mounting options include LB foot, FA flange, SDB pivot, and TC trunnion, complementing the CA rear pivot cover.
Remember that a standard double-acting cylinder drifts if air pressure drops or the valve is centred; the internal bumpers only decelerate the stroke end and do not function as a braking lock. To suspend a load safely in mid-air, integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MF32-40 Stainless Steel Mini Cylinder MF32X600SCA FAQ
The 32 mm bore provides a push force of 402.2 N and a pull force of 345.6 N at 0.5 MPa. At 0.7 MPa, push is 563 N and pull is 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa. Air is supplied through a 1/4" port, and the male rod thread is M10x1.25.
No, the piston will drift if air is lost or the valve is centred; the fixed TPU bumper pads only decelerate the stroke end and do not act as a lock. For vertical holding, use an external rod lock or pilot check valve. Also, this is a non-standard 600 mm stroke (max standard is 500 mm) built to order, and the -S magnet allows CMSG/DMSG/EMSG sensor installation.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MF32-40 Stainless Steel Mini Cylinder MF32X600SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.