Airtac MF32-40 Stainless Steel Mini Cylinder MF32X60SCA
The AirTAC Airtac MF32-40 Stainless Steel Mini Cylinder MF32X60SCA is a genuine double acting JIS-standard round-body mini air cylinder with a Ø32mm bore and 60mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke60 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X60SCA
Delivering 402.2 N of push force at 0.5 MPa, this double-acting JIS-standard round-body mini cylinder integrates a SUS304 stainless barrel with riveted aluminium covers to handle mild washdowns. The built-in piston magnet allows direct mounting of CMSG, DMSG, or EMSG switches for position sensing, while the 1/4" port feeds the chamber efficiently. Its heterogeneous two-way seal retains an oil film for extended operational life.
Because the riveted rolling-packed structure is physically shorter than an ISO 6432 cylinder of the same bore and stroke, it saves valuable mounting length in tight fixtures. Fixed TPU bumper pads and a front-cover anti-impact pad soften the stroke-end impact without offering adjustable cushioning. Plan for roughly 241 N of actual work at 0.5 MPa, which means it can safely lift about 20.5 kg vertically against gravity.
Airtac MF32-40 Stainless Steel Mini Cylinder MF32X60SCA Technical Specifications
| Model | Airtac MF32-40 Stainless Steel Mini Cylinder MF32X60SCA |
|---|---|
| Series | MF JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MF32-40 Stainless Steel Mini Cylinder MF32X60SCA
| MF | JIS-standard round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X60SCA Is Used
Articulated Clamping Arm
Uses the CA pivot back cover to swing a 20 kg machining fixture into place, leveraging the 402.2 N push force to secure the part during milling.
Package Divert Gate
Actuates a routing flap on a packaging line where the compact JIS body length is required to fit between parallel conveyor belts.
Pallet Stopper Mechanism
Deploys a physical stop block for incoming pallets, relying on the fixed TPU bumper pads to absorb the kinetic energy of the arriving load.
Is the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X60SCA the Right Cylinder?
When sizing this 32 mm bore, stepping down to the MF25 yields 245.3 N of push force at 0.5 MPa, whereas moving up to the MF40 provides 628.3 N. The 60 mm stroke keeps the rod side-load risk low, but always verify your guiding geometry to prevent premature seal wear. This specific SKU includes the -S magnet for electronic or reed sensors and features a CA pivot back cover for articulating rod-end alignment.
Remember that a standard double-acting cylinder will drift and drop its payload if air pressure is lost or the directional valve is centred. The TPU bumpers only decelerate the piston near the end of the stroke and do not act as a braking mechanism. If your application requires strict position holding, you must add an external pilot-operated check valve or a dedicated rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MF32-40 Stainless Steel Mini Cylinder MF32X60SCA FAQ
This 32 mm bore cylinder features a 1/4" air port and an M10x1.25 male rod thread. It generates 402.2 N of push force and 345.6 N of pull force at 0.5 MPa. At 0.7 MPa, the push increases to 563 N and the pull to 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, the MF is a JIS-standard round-body cylinder that is physically shorter than an ISO 6432 unit, so ISO brackets will not fit. Additionally, this model uses fixed TPU bumper pads to decelerate the stroke end rather than an adjustable air cushion. For adjustable cushioning, look at the MFC variant.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MF32-40 Stainless Steel Mini Cylinder MF32X60SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.