Airtac MF32-40 Stainless Steel Mini Cylinder MF32X700SCA
The AirTAC Airtac MF32-40 Stainless Steel Mini Cylinder MF32X700SCA is a genuine double acting JIS-standard round-body mini air cylinder with a Ø32mm bore and 700mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke700 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X700SCA
Delivering 402.2 N of push force at 0.5 MPa, this double-acting 32 mm bore AirTAC mini cylinder handles demanding actuation tasks. Because the stroke is 700 mm, it is manufactured as a non-standard, made-to-order unit exceeding the 500 mm standard maximum. For the same bore and stroke, the JIS-standard riveted SUS304 stainless round body is physically shorter than an ISO 6432 cylinder, yielding a real packaging advantage in tight machinery. The aluminium covers are joined to the barrel via a rolling-packed structure, and a two-way oil-retaining piston seal ensures long-term lubrication.
At 0.5 MPa you can plan for roughly 241 N of actual work output, which translates to lifting about 20.5 kg vertically with a 2:1 safety margin. Fixed TPU bumper pads and a front-cover anti-impact pad soften the end-of-stroke impact, though they decelerate rather than provide adjustable cushioning. This specific SKU includes a piston magnet for position sensing and features a CA rear pivot cover. Air connects via a 1/4" port, and the 12 mm rod uses an M10x1.25 male thread.
Airtac MF32-40 Stainless Steel Mini Cylinder MF32X700SCA Technical Specifications
| Model | Airtac MF32-40 Stainless Steel Mini Cylinder MF32X700SCA |
|---|---|
| Series | MF JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MF32-40 Stainless Steel Mini Cylinder MF32X700SCA
| MF | JIS-standard round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X700SCA Is Used
Long-Reach Diversion
Pushes heavy cartons across a wide sorting conveyor using its 700 mm travel, relying on the 402.2 N push force at 0.5 MPa to overcome side friction.
High-Bay Ejection
Ejects packaged goods from the top tier of a palletizing station, where the compact JIS body saves vertical mounting space compared to standard ISO units.
Textile Beam Shifting
Shifts heavy textile beams laterally between processing stages, using the CA pivot mount to accommodate slight angular misalignment during the 700 mm extension.
Is the Airtac MF32-40 Stainless Steel Mini Cylinder MF32X700SCA the Right Cylinder?
When sizing this actuator, note that stepping down to the MF25 bore drops the 0.5 MPa push force to 245.3 N, while stepping up to the MF40 bore increases it to 628.3 N. This 32 mm model strikes a strong middle ground for medium-duty handling. Because the 700 mm stroke is quite long, be mindful of rod bending under heavy side loads and ensure adequate guiding along the travel path.
The integrated magnet (-S) directly supports CMSG, DMSG, and EMSG switches for end-of-stroke detection. Remember that a standard double-acting cylinder will drift and drop its load if air pressure is lost or the valve is centred; the bumpers only soften the end stops and act as no brake. To suspend a load safely mid-stroke, fit an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MF32-40 Stainless Steel Mini Cylinder MF32X700SCA FAQ
This 32 mm bore cylinder features a 1/4" air port and an M10x1.25 male rod thread. The thrust output is 402.2 N push and 345.6 N pull at 0.5 MPa, increasing to 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
This model includes a magnet for CMSG, DMSG, or EMSG switches, but it uses fixed TPU bumper pads that decelerate the stroke end rather than an adjustable air cushion (for adjustable cushioning, look at the MFC variant). Additionally, the 700 mm stroke is a non-standard made-to-order length exceeding the 500 mm standard maximum.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MF32-40 Stainless Steel Mini Cylinder MF32X700SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.