Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60CM
The AirTAC Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60CM is a genuine double acting JIS-standard round-body mini air cylinder with a Ø40mm bore and 60mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ40 mm
- Stroke60 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM14×1.5
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60CM
Delivering 628.3 N of push force at 0.5 MPa, this double-acting 40 mm bore mini cylinder handles demanding clamping and lifting tasks. The JIS-standard round-body architecture is notably shorter than a comparable ISO 6432 unit, saving valuable mounting length in tight machine fixtures. It features a SUS304 stainless-steel barrel with riveted aluminium covers, providing reliable resistance to mild corrosion and washdown environments.
The piston relies on a heterogeneous two-way seal that retains an oil film for long service life, while fixed TPU bumper pads and a front-cover anti-impact pad soften stroke-end impacts. Equipped with a CM round-end rear cover, this 60 mm stroke unit uses a 1/4" port and an M14x1.5 male rod thread. For practical sizing, plan for roughly 377 N of real work at 0.5 MPa, which means it can safely lift about 32 kg vertically with a 2:1 safety margin.
Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60CM Technical Specifications
| Model | Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60CM |
|---|---|
| Series | MF JIS mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60CM
| MF | JIS-standard round-body mini cylinder (double-acting). |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60CM Is Used
Heavy-Duty Stamping Ejector
Provides the robust 628.3 N push at 0.5 MPa needed to eject thick metal blanks from a stamping die, utilizing the compact JIS body to fit within tight press tooling.
Pallet Diverting Gate
Actuates a heavy routing gate on a packaging conveyor, where the SUS304 stainless barrel withstands daily washdowns and the CM round-end rear cover allows pivot mounting.
Vertical Carton Lift
Lifts approximately 32 kg cartons vertically between conveyor tiers, relying on the 40 mm bore's substantial thrust while maintaining a 2:1 safety margin.
Is the Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60CM the Right Cylinder?
When sizing this 40 mm bore unit, verify your actual load requirements against its 628.3 N push force at 0.5 MPa. If your application is lighter, stepping down to the MF32 bore provides 402.2 N of push force, which may be a more efficient choice; since 40 mm is the largest available MF bore, heavier demands beyond 879.6 N at 0.7 MPa will require a different cylinder family entirely. For a 60 mm stroke, side-load and rod-bending stresses are minimal, but always ensure the load is axially aligned.
Because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG position switches; you must physically verify stroke completion or select an -S variant if sensing is required. Furthermore, the fixed TPU bumpers only decelerate the piston near the stroke end and do not function as a lock. If air pressure drops or the valve is centred, the rod will drift, so incorporate an external pilot-operated check valve or rod lock to suspend loads safely.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60CM FAQ
This 40 mm bore cylinder features a 1/4" air port and an M14x1.5 male rod thread. The double-acting thrust outputs are 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push and 738.9 N pull at 0.7 MPa, with a theoretical maximum force of 128.1 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet option, so it cannot accept CMSG, DMSG, or EMSG switches. You would need the -S variant for sensing capabilities. Additionally, its JIS-standard body is shorter than an ISO 6432 cylinder, and the fixed TPU bumper pads only decelerate the stroke end rather than holding the load in place.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.