Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60SUTC
The AirTAC Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60SUTC is a genuine double acting JIS-standard round-body mini air cylinder with a Ø40mm bore and 60mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ40 mm
- Stroke60 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM14×1.5
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60SUTC
Delivering 628.3 N of push force at 0.5 MPa, this double-acting JIS-standard round-body mini cylinder handles heavy-duty tasks within tight fixtures. The SUS304 stainless steel barrel and riveted aluminium covers resist mild corrosion and washdown, while the two-way piston seal retains an oil film for extended lifespan. Because the MF body is shorter than a comparable ISO 6432 cylinder for the same 40 mm bore and 60 mm stroke, it provides a distinct packaging advantage.
Equipped with a 1/4" port and an M14x1.5 male rod thread, the unit features fixed TPU bumper pads and a front-cover anti-impact pad that soften stroke-end impact without offering adjustable cushioning. Plan for roughly 377 N of actual work at 0.5 MPa, which translates to safely lifting about 32 kg vertically with a 2:1 margin. The included -S magnet enables CMSG, DMSG, or EMSG switches for position sensing.
Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60SUTC Technical Specifications
| Model | Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60SUTC |
|---|---|
| Series | MF JIS mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60SUTC
| MF | JIS-standard round-body mini cylinder (double-acting). |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60SUTC Is Used
Press-Fit Bushings
Drives small bronze bushings into aluminum housings on an automated assembly line using its 628.3 N push capacity at 0.5 MPa.
Pallet Diverter
Actuates a heavy diverting gate on a packaging conveyor, where the compact JIS body length leaves room for adjacent guide rails.
Vacuum Lifter Ejector
Pushes stacked cardboard blanks out of a vacuum gripper, relying on the SUS304 barrel to withstand humid corrugated board environments.
Is the Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60SUTC the Right Cylinder?
When sizing this 40 mm bore, step down to the MF32 if your application only requires 402.2 N of push force at 0.5 MPa, as the MF40 is the largest available bore in this series. If air pressure drops or the valve is centred, the piston will drift since the TPU pads only decelerate the stroke end rather than locking the rod; integrate a pilot-operated check valve or external rod lock to sustain a suspended load. This specific SKU includes a U flat-end back cover and a TC trunnion mount, which accommodates pivoting movements along with the -S magnet for sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60SUTC FAQ
At 0.5 MPa it pushes 628.3 N and pulls 527.8 N. At 0.7 MPa it pushes 879.6 N and pulls 738.9 N. The theoretical maximum force is 128.1 kgf at 1.0 MPa. The air port is 1/4".
No, the piston drifts on air loss; use a pilot check valve or rod lock to hold loads. It uses fixed TPU bumper pads to decelerate, not an adjustable cushion. The -S magnet allows CMSG/DMSG/EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MF32-40 Stainless Steel Mini Cylinder MF40X60SUTC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.