Airtac MI25~40 Stainless Steel Mini Cylinder MI25X200SCA
The AirTAC Airtac MI25~40 Stainless Steel Mini Cylinder MI25X200SCA is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 200mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X200SCA
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles demanding 200 mm stroke tasks. The Ø25 bore conforms to ISO 6432 mounting dimensions, dropping directly into standard mini-cylinder brackets and clevises for straightforward design integration. Its stainless barrel and rod resist mild corrosion, giving it a real edge over painted alternatives in damp or washdown settings.
The built-in -S piston magnet supports CMSG, DMSG and EMSG switches for position sensing, while fixed TPU bumper pads absorb stroke-end impact. For practical sizing, plan for roughly 147 N of real work at 0.5 MPa, which translates to lifting about 12.5 kg vertically with a 2:1 safety margin. Air connects via a 1/8 inch port.
Airtac MI25~40 Stainless Steel Mini Cylinder MI25X200SCA Technical Specifications
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X200SCA |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI25X200SCA
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X200SCA Is Used
Package Diverting Gate
Actuates a routing flap on a packaging line, using the 245.3 N push force to redirect heavy cartons reliably at speed.
Vertical Parts Lift
Raises lightweight aluminium jigs over a 200 mm vertical span, safely lifting parts under 12.5 kg with a 2:1 margin.
Washdown Stopper Arm
Deploys a stainless-steel stop block in a damp food-processing area, leveraging the corrosion-resistant barrel to halt trays.
Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X200SCA the Right Cylinder?
Sizing this model against its neighbours ensures the right fit: the smaller Ø20 bore yields 157.0 N push at 0.5 MPa, whereas the larger non-ISO Ø32 bore provides 402.2 N. The Ø25 hits a strong middle ground for 245.3 N tasks. Because this is a 200 mm stroke, watch for rod bending under heavy side loads and use a guide rail. The CA rear pivot cover suits articulated clevis mounting.
Note that a standard double-acting cylinder drifts if air pressure drops or the valve is centred—the fixed bumpers only decelerate the stroke end and act as neither a lock nor a brake. To suspend a vertical load safely, fit an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI25~40 Stainless Steel Mini Cylinder MI25X200SCA FAQ
At 0.5 MPa it provides 245.3 N push and 206.1 N pull. At 0.7 MPa it delivers 343.4 N push and 288.5 N pull. The theoretical maximum force is 50 kgf at 1.0 MPa. The air port size is 1/8 inch.
Yes, the -S suffix indicates a built-in piston magnet compatible with CMSG, DMSG and EMSG switches. The CA back cover provides a rear pivot point for clevis mounting, and the Ø25 bore uses standard ISO 6432 mounting dimensions.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI25X200SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.