Airtac MI25~40 Stainless Steel Mini Cylinder MI25X20CM
The AirTAC Airtac MI25~40 Stainless Steel Mini Cylinder MI25X20CM is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 20mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke20 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X20CM
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel mini cylinder handles robust actuation in tight spaces. The 25 mm bore uses a 1/8" port and an M10x1.25 male rod thread, while the 20 mm stroke provides rapid, short-travel movement. Its round-body, riveted construction features a stainless barrel and rod that resist mild corrosion and washdown better than painted alternatives.
The CM round end back cover keeps the rear profile smooth for simple mounting. Because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG or EMSG position switches. For real-world sizing, plan for about 147 N of usable work at 0.5 MPa, which translates to lifting roughly 12.5 kg vertically with a 2:1 safety margin.
Airtac MI25~40 Stainless Steel Mini Cylinder MI25X20CM Technical Specifications
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X20CM |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI25X20CM
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X20CM Is Used
Package Diverter Gate
Snaps a short 20 mm diverter arm into place on a packaging line to route small cartons at high speed.
Clamp Actuator
Provides 245.3 N of push at 0.5 MPa to secure an aluminium workpiece against a CNC machining fixture.
Bin Lid Latch
Locks a stainless-steel access hatch on a washdown station, benefiting from the rod's natural corrosion resistance.
Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X20CM the Right Cylinder?
When sizing this 25 mm bore, the smaller Ø20 generates 157 N of push at 0.5 MPa, whereas stepping up to the Ø32 yields 402 N. This model fits tasks needing moderate force in a very compact footprint. Remember that a plain cylinder drifts if air pressure drops or the valve is centred; the fixed TPU bumper pads only soften the stroke end rather than locking the load. For secure holding, install an external rod lock or a pilot-operated check valve. If position feedback is required, select the -S magnet variant instead of this non-sensing unit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI25~40 Stainless Steel Mini Cylinder MI25X20CM FAQ
This 25 mm bore cylinder uses a 1/8" port. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical maximum force of 50 kgf at 1.0 MPa.
The Ø25 bore uses the ISO 6432 mounting interface, so it drops directly into standard mini-cylinder clevises and foot brackets. However, because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG or EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI25X20CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.