Airtac MI25~40 Stainless Steel Mini Cylinder MI25X20SCA
The AirTAC Airtac MI25~40 Stainless Steel Mini Cylinder MI25X20SCA is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 20mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke20 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X20SCA
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles substantial work in a compact footprint. The Ø25 mm bore conforms to ISO 6432 mounting dimensions, dropping directly into standard mini-cylinder brackets and clevises for easy design integration. Its stainless barrel and rod resist mild corrosion, giving it a real edge over painted alternatives in damp or washdown environments.
Equipped with a built-in magnet for CMSG, DMSG, or EMSG sensors, the unit uses fixed TPU bumper pads to decelerate the stroke end. With a 0.5 MPa push rating of 245.3 N, you can plan for roughly 147 N of actual work, which translates to lifting about 12.5 kg vertically with a safe 2:1 margin. The 1/8" port and M10x1.25 male rod thread ensure robust pneumatic and mechanical connections.
Airtac MI25~40 Stainless Steel Mini Cylinder MI25X20SCA Technical Specifications
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X20SCA |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI25X20SCA
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X20SCA Is Used
Diverter Gate Actuation
Snaps a sorting flap on a packaging line in just 20 mm of travel, utilizing the 245.3 N push force to redirect heavy cartons reliably.
Washdown Process Valve
The stainless construction survives damp food-processing zones, while the CA clevis allows the cylinder to pivot smoothly as it opens and closes a fluid valve.
Pallet Stopper Arm
Uses the 12.5 kg vertical lift equivalent to hold a lightweight gate or stopper mechanism on a low-profile material handling conveyor.
Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X20SCA the Right Cylinder?
When sizing this 20 mm stroke model, compare it against its neighbors: a Ø20 bore provides 157.0 N of push at 0.5 MPa, while stepping up to a Ø32 yields 402.2 N. This Ø25 strikes a balance, though if your application loses air or centers the valve, the piston will drift; the bumpers only soften the end of travel and do not act as a lock. For securing a suspended load, add an external rod lock or pilot check valve.
The CA rear pivot cover is ideal for clevis mounting on short-stroke pivoting mechanisms. Because this SKU includes the -S magnet, it is fully ready for position sensing. Despite the brief 20 mm travel, minimize side-loading to prevent rod bending and premature seal wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI25~40 Stainless Steel Mini Cylinder MI25X20SCA FAQ
This double-acting cylinder has a 1/8" port and generates 245.3 N push / 206.1 N pull at 0.5 MPa, and 343.4 N push / 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
Yes, the -S suffix means it has a built-in magnet for CMSG, DMSG, or EMSG switches. The CA back cover provides a rear pivot/clevis mounting interface, and the Ø25 bore follows ISO 6432 mounting dimensions for standard mini-cylinder brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI25X20SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.