Airtac MI25~40 Stainless Steel Mini Cylinder MI25X600SCMLB
The AirTAC Airtac MI25~40 Stainless Steel Mini Cylinder MI25X600SCMLB is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 600mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke600 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X600SCMLB
Generating 245.3 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles substantial work over a 600 mm travel distance. Because 600 mm exceeds the 500 mm standard stroke limit for a Ø25 bore, this specific SKU is manufactured as a made-to-order unit. The stainless-steel barrel and Ø10 piston rod naturally resist mild corrosion, giving it a distinct advantage over painted alternatives in damp or washdown settings.
Equipped with an -S piston magnet, the unit readily accepts CMSG, DMSG, or EMSG switches for position sensing. It conforms to ISO 6432 mounting dimensions, dropping directly into standard mini-cylinder brackets and clevises. For practical sizing, plan for roughly 147 N of actual work at 0.5 MPa, which equates to lifting about 12.5 kg vertically with a 2:1 safety margin. The 1/8" port and M10x1.25 male rod thread ensure solid pneumatic and mechanical connections.
Airtac MI25~40 Stainless Steel Mini Cylinder MI25X600SCMLB Technical Specifications
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X600SCMLB |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI25X600SCMLB
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X600SCMLB Is Used
Long-Reach Diverting
Pushes packages across a wide conveyor belt using the extended 600 mm stroke, relying on the 245.3 N thrust to deflect heavy cartons without stalling.
Vertical Parts Lift
Elevates components to an upper tier, safely handling around 12.5 kg of actual payload while the stainless build withstands humid storage environments.
Automated Gate Control
Actuates a distant safety guard on a machining cell, using the LB foot bracket and CM round end to secure the lengthy 600 mm extension firmly.
Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X600SCMLB the Right Cylinder?
When sizing this actuator, the neighboring Ø20 bore provides 157.0 N of push at 0.5 MPa, while stepping up to the Ø32 yields 402.2 N, helping you bracket your force needs. This model includes an LB foot mount and a CM round rear cover for stable base mounting. Because the 600 mm stroke is quite long for a mini cylinder, carefully manage side loads to prevent rod bending and premature seal wear. The fixed TPU bumper pads only decelerate the stroke end; they do not act as a lock. If the load must remain suspended during air loss or valve centering, the piston will drift, so an external rod lock or pilot-operated check valve is required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI25~40 Stainless Steel Mini Cylinder MI25X600SCMLB FAQ
At 0.5 MPa it pushes 245.3 N and pulls 206.1 N. At 0.7 MPa it pushes 343.4 N and pulls 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa. The air port is 1/8" and the male rod thread is M10x1.25.
The 600 mm stroke is a non-standard, made-to-order length exceeding the 500 mm maximum. The fixed TPU bumpers only decelerate the stroke end and do not function as a brake. The piston will drift if air is lost, so an external rod lock or pilot check valve is needed to hold a suspended load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI25X600SCMLB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.