Airtac MI25~40 Stainless Steel Mini Cylinder MI25X60CA
The AirTAC Airtac MI25~40 Stainless Steel Mini Cylinder MI25X60CA is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X60CA
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles demanding 60 mm strokes with a CA pivot clevis. The Ø25 mm bore conforms to ISO 6432 mounting dimensions, dropping directly into standard mini-cylinder brackets. Its riveted stainless barrel and Ø10 mm rod shrug off mild corrosion better than painted alternatives in damp environments.
Fixed TPU bumper pads absorb stroke-end impact without offering adjustable cushioning. Because this SKU lacks the -S suffix, it cannot accept CMSG, DMSG or EMSG magnetic switches. Plan for roughly 147 N of actual work at 0.5 MPa, which translates to lifting about 12.5 kg vertically with a safe 2:1 margin.
Airtac MI25~40 Stainless Steel Mini Cylinder MI25X60CA Technical Specifications
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X60CA |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI25X60CA
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X60CA Is Used
Package Diverter Arm
Swings a sorting gate on a packaging line using the CA pivot clevis, relying on the 245.3 N push force to snap 12 kg cartons cleanly onto an adjacent belt.
Stamping Ejector
Kicks stamped metal blanks out of a press die in 60 mm, utilizing the stainless construction to resist cutting fluid mist and shop floor humidity.
Pallet Stop Gate
Acts as a spring-loaded-free stop mechanism for lightweight pallets, dropping down to halt movement before lifting clear for the next workflow stage.
Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X60CA the Right Cylinder?
When sizing this 25 mm bore, the smaller Ø20 generates 157 N of push at 0.5 MPa, while the larger non-ISO Ø32 provides 402 N. If your pivot mechanism loses air, this plain cylinder will drift; the CA clevis and fixed TPU bumpers only decelerate the end of travel. Secure a suspended load using an external rod lock or pilot-operated check valve rather than relying on the cylinder itself.
The 1/8" port and M10×1.25 male rod thread match standard pneumatic fittings. For position feedback, select the -S magnet variant to enable sensor mounting, as this base model cannot accept switches. The 60 mm stroke is well within the 500 mm maximum, keeping rod bending stress low.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI25~40 Stainless Steel Mini Cylinder MI25X60CA FAQ
This 25 mm bore cylinder features a 1/8" port and a Ø10 mm rod. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, increasing to 343.4 N push and 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
No, this specific SKU lacks the internal magnet required for switches. You must order the -S variant to use CMSG, DMSG or EMSG sensors. The unit features a CA rear pivot clevis and fixed TPU bumper pads that decelerate the stroke end but do not act as an adjustable air cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI25X60CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.