Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75CM
The AirTAC Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75CM is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75CM
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust actuation tasks. The Ø25 mm bore uses a 1/8" air port and an M10x1.25 male rod thread, while the rear CM round end cover provides a clean, compact mounting footprint for tight assemblies. Its stainless barrel and rod resist mild corrosion, giving it a real edge over painted alternatives in damp or washdown environments.
Built with fixed TPU bumper pads to decelerate the piston at stroke ends, it operates smoothly at speeds of 30-800 mm/s. Because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG or EMSG position switches. For practical sizing, plan for a real work load of about 147 N (60 percent of the 0.5 MPa rating), which equates to safely lifting a 12.5 kg part vertically with a 2:1 margin.
Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75CM Technical Specifications
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75CM |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75CM
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75CM Is Used
Package Diverting Gate
Actuates a routing flap on a packaging line, using its 245.3 N thrust to push heavy cartons smoothly onto a secondary belt at 75 mm stroke.
Parts Ejection Chute
Ejects machined metal components from a fixture, leveraging the stainless build to resist coolant mist while safely moving parts weighing up to 12.5 kg.
Clamp Actuation
Drives a secondary clamping arm on an assembly jig, providing reliable holding pressure via the 1/8" port within a compact 25 mm bore footprint.
Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75CM the Right Cylinder?
When sizing this 75 mm stroke unit, compare it against its neighbours: the Ø20 bore provides 157.0 N push at 0.5 MPa, while the larger Ø32 offers 402.2 N. This model occupies a strong middle ground for medium-force tasks. It conforms to the ISO 6432 mounting interface for Ø8-Ø25 bores, meaning it drops directly into standard mini-cylinder brackets and clevises without custom hardware.
Note that a plain double-acting cylinder drifts when air is lost or the valve is centred, as the TPU bumpers only soften the stroke end and act as neither a lock nor a brake. To suspend a load safely, install an external rod lock or a pilot-operated check valve. If your application requires position feedback, select the -S magnet variant to enable sensor mounting.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75CM FAQ
This Ø25 mm bore cylinder features a 1/8" air port and an M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical maximum force of 50 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG or EMSG switches. You must choose the -S variant to enable magnetic sensing. It uses fixed TPU bumper pads for deceleration and features a rear CM round end cover for straightforward mounting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.