Airtac MI25~40 Stainless Steel Mini Cylinder MI32X160CM
The AirTAC Airtac MI25~40 Stainless Steel Mini Cylinder MI32X160CM is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 160mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke160 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X160CM
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles substantial workloads within a compact footprint. The stainless-steel barrel and piston rod provide mild corrosion resistance, making it highly suitable for damp environments or routine washdowns compared to painted alternatives. It features a 1/8 inch air port and a CM round end rear cover.
Fixed TPU bumper pads absorb the impact at the stroke extremes, decelerating the piston without the complexity of adjustable cushioning. For practical sizing, plan for a safe working load of roughly 241 N, which is about 60 percent of the 0.5 MPa rating. This equates to lifting a 20.5 kg mass vertically with a safe 2:1 margin.
Airtac MI25~40 Stainless Steel Mini Cylinder MI32X160CM Technical Specifications
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI32X160CM |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI32X160CM
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X160CM Is Used
Package Diverting Gate
Actuates a heavy routing flap on a packaging conveyor, utilizing the 402.2 N push force to redirect filled cartons efficiently.
Press Fit Bushings
Pushes bronze bushings into aluminum housings on an assembly line, relying on the 241 N safe working load for consistent insertion.
Pallet Stopper Arm
Deploys a robust stop block to halt pallets at a loading station, absorbing kinetic energy through the fixed TPU bumper pads.
Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X160CM the Right Cylinder?
When sizing this 32 mm bore, stepping down to a 25 mm version drops the 0.5 MPa push force to 245.3 N, while moving up to a 40 mm bore increases it to 628.3 N. The 160 mm stroke is well within the 500 mm maximum standard stroke, keeping the unit readily available. Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG position switches; you must select an -S variant if sensing is required.
Remember that the fixed bumpers only soften the end-of-stroke impact and do not function as a lock. If air pressure drops or the valve is centered, the piston will drift and drop the load. To maintain vertical positioning, integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI25~40 Stainless Steel Mini Cylinder MI32X160CM FAQ
This 32 mm bore cylinder features a 1/8 inch air port and an M10x1.25 male rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You must purchase the -S variant to enable magnetic sensing. The stainless-steel riveted round body also features a CM round end cover for straightforward mounting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI32X160CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.