Airtac MI25~40 Stainless Steel Mini Cylinder MI32X450R
The AirTAC Airtac MI25~40 Stainless Steel Mini Cylinder MI32X450R is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 450mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke450 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X450R
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles substantial work. The stainless-steel barrel and piston rod resist mild corrosion and washdown, outperforming painted alternatives in damp environments. Its riveted construction keeps the unit compact while fixed TPU bumper pads absorb stroke-end impact. Equipped with a 1/8 inch port and an R axial-in rear cover, it integrates cleanly into pneumatic setups.
For practical sizing, plan for roughly 241 N of real work at 0.5 MPa, which safely lifts about 20.5 kg vertically with a 2:1 margin. The 450 mm stroke falls within the 500 mm standard limit, providing extended reach without requiring a custom order. Note that because this SKU lacks a magnet, it cannot accept CMSG, DMSG or EMSG sensors; you would need the -S variant for position detection.
Airtac MI25~40 Stainless Steel Mini Cylinder MI32X450R Technical Specifications
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI32X450R |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI32X450R
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X450R Is Used
Package Diverting Gate
Actuates a heavy routing flap on a logistics conveyor, using the 402.2 N thrust to push parcels firmly onto secondary sorting belts.
Pallet Stacking Pusher
Extends 450 mm to index empty pallets into a stacking cradle, taking advantage of the long stroke and 20.5 kg safe vertical lift capacity.
Textile Loom Tensioner
Maintains heavy fabric tension across a wide loom bed, relying on the stainless-steel rod to withstand humid manufacturing conditions.
Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X450R the Right Cylinder?
When sizing this 32 mm bore, the adjacent 25 mm option yields 245.3 N push, while the larger 40 mm provides 628.3 N at 0.5 MPa, allowing you to step up or down based on exact load requirements. If your application needs position feedback, select an -S model to enable magnetic switches. The R back cover provides an axial-in port orientation for tight mounting spaces.
Remember that a standard cylinder drifts when air is lost or the valve is centered, as the fixed TPU pads only decelerate the stroke end rather than locking the rod. To suspend a load safely, install an external rod lock or a pilot-operated check valve. Additionally, the 450 mm stroke demands careful alignment to prevent rod bending and premature seal wear from side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI25~40 Stainless Steel Mini Cylinder MI32X450R FAQ
This 32 mm bore cylinder features a 1/8 inch port and a 12 mm rod. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG or EMSG switches. You must select the -S variant to enable position sensing. It uses fixed TPU bumper pads for deceleration, not an adjustable air cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI32X450R
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.