Airtac MI25~40 Stainless Steel Mini Cylinder MI32X600SCM
The AirTAC Airtac MI25~40 Stainless Steel Mini Cylinder MI32X600SCM is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 600mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke600 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X600SCM
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles substantial actuation tasks. The 600 mm stroke is a non-standard, made-to-order length that exceeds the 500 mm maximum standard for this bore, making it ideal for applications requiring extended travel. Its stainless-steel barrel and piston rod resist mild corrosion and washdown environments better than painted alternatives. Equipped with a built-in magnet (-S), it supports CMSG, DMSG and EMSG sensors, while the CM round end cover provides a clean rear profile.
For practical sizing, plan for a safe working load of roughly 241 N, which is about 60 percent of the 0.5 MPa push rating. This equates to lifting a 20.5 kg part vertically with a 2:1 safety margin. Fixed TPU bumper pads absorb the impact at stroke extremes, though they decelerate rather than provide adjustable cushioning. Air operates through a 1/8 inch port, driving the 12 mm rod at speeds between 30 and 800 mm/s.
Airtac MI25~40 Stainless Steel Mini Cylinder MI32X600SCM Technical Specifications
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI32X600SCM |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI32X600SCM
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X600SCM Is Used
Long-Reach Diverting
Pushes heavy packages across a 600 mm transfer gap on a packaging conveyor, utilising the 402.2 N thrust to overcome friction.
Vertical Parts Lift
Raises 20 kg tote bins between machinery levels, safely operating within the calculated 20.5 kg vertical lift margin.
Washdown Actuation
Drives a stainless-steel gating mechanism in a damp food-processing line where the riveted round body resists mild corrosion.
Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X600SCM the Right Cylinder?
When sizing this 32 mm bore, the adjacent 25 mm option yields 245.3 N of push at 0.5 MPa, whereas stepping up to the 40 mm bore provides 628.3 N. This model sits perfectly in the middle for medium-force tasks. Because the 600 mm stroke is a non-standard, made-to-order length, carefully verify your side-load geometry; extended rods are prone to bending without proper guidance.
Remember that a standard double-acting cylinder drifts when air pressure is lost or the valve is centered, as the TPU bumpers only soften the end-of-stroke impact and act as neither a brake nor a lock. To suspend a load safely during an emergency stop, incorporate an external pilot-operated check valve or a dedicated rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI25~40 Stainless Steel Mini Cylinder MI32X600SCM FAQ
This 32 mm bore cylinder features a 1/8 inch air port. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa.
The -S suffix indicates a built-in piston magnet, allowing you to mount CMSG, DMSG or EMSG electronic switches. It uses fixed TPU bumper pads for end-of-stroke deceleration rather than an adjustable air cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI32X600SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.