Airtac MI25~40 Stainless Steel Mini Cylinder MI32X60CM
The AirTAC Airtac MI25~40 Stainless Steel Mini Cylinder MI32X60CM is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X60CM
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavier automation tasks. The stainless-steel barrel and piston rod resist mild corrosion, making it highly suitable for damp or washdown environments where painted steel fails. Its riveted construction keeps the body compact, while fixed TPU bumper pads absorb impact energy at the stroke ends. The unit features a CM round end rear cover and a 1/8 inch air port.
Because it lacks a magnet, this specific SKU cannot accept CMSG, DMSG, or EMSG sensors; you must specify an -S variant to enable position detection. For moving real loads, plan for a safe working capacity of roughly 241 N, which is about 60 percent of the 0.5 MPa rating. In vertical lift applications, this translates to hoisting approximately 20.5 kg safely with a two-to-one margin.
Airtac MI25~40 Stainless Steel Mini Cylinder MI32X60CM Technical Specifications
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI32X60CM |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI32X60CM
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X60CM Is Used
Package Diverting Gate
Actuates a heavy routing flap on a logistics sorting line, using its 402.2 N thrust to push parcels firmly onto secondary chutes.
Carton Flap Folding
Drives the mechanical folder arms on a corrugated box sealing machine, providing the reliable force needed to tuck thick material.
Pallet Stacking Stopper
Functions as a physical end-stop in an automated storage system, halting incoming pallets before the strapping station.
Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X60CM the Right Cylinder?
When sizing this 32 mm bore, compare it against its neighbors: the 25 mm bore yields 245.3 N of push at 0.5 MPa, while the larger 40 mm bore provides 628.3 N. Choose this model when your application demands that middle-ground force. The 60 mm stroke is well within the 500 mm maximum, keeping the rod rigid and minimizing side-load bending. If your mechanism must maintain its vertical position during a loss of air pressure or when a valve is centered, this cylinder will drift; you must integrate an external rod lock or a pilot-operated check valve. The fixed TPU bumpers only decelerate the piston near the end of travel, acting solely as impact absorbers rather than a braking mechanism. Mounting options include LB foot, FA flange, SDB pivot, and TC trunnion brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI25~40 Stainless Steel Mini Cylinder MI32X60CM FAQ
This 32 mm bore cylinder features a 1/8 inch air port and a male M10x1.25 rod thread. It generates 402.2 N of push and 345.6 N of pull at 0.5 MPa, increasing to 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You would need the -S variant to enable sensing. Additionally, the fixed TPU bumper pads only decelerate the piston at the stroke end; they do not act as an adjustable air cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI32X60CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.