Airtac MI25~40 Stainless Steel Mini Cylinder MI32X760SCM
The AirTAC Airtac MI25~40 Stainless Steel Mini Cylinder MI32X760SCM is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 760mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke760 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X760SCM
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles substantial work. The stainless-steel barrel and piston rod resist mild corrosion, making it superior to painted alternatives in damp environments. Its 760 mm stroke is a non-standard, made-to-order length that exceeds the 500 mm maximum standard for this bore.
Equipped with a built-in magnet for CMSG, DMSG, or EMSG switches, the unit accepts position sensors directly. Fixed TPU bumper pads absorb end-of-stroke impacts to protect the mechanism. For practical sizing, plan for roughly 241 N of actual work at 0.5 MPa, which translates to lifting about 20.5 kg vertically with a safe 2:1 margin. The 1/4 inch port supplies ample airflow for the 30-800 mm/s speed range.
Airtac MI25~40 Stainless Steel Mini Cylinder MI32X760SCM Technical Specifications
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI32X760SCM |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 760 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI32X760SCM
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×760 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X760SCM Is Used
Long-Reach Diverter
Pushes heavy packages across a transfer line using the 760 mm extended reach and 402.2 N push force.
Washdown Gate Actuator
Operates stainless-steel access doors in damp food processing zones where mild corrosion resistance is required.
High-Bay Material Extractor
Extracts tote bins from tall shelving racks, utilizing the 20.5 kg vertical lift capacity safely.
Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X760SCM the Right Cylinder?
When sizing this 32 mm bore, the smaller Ø25 generates 245.3 N push, while the larger Ø40 yields 628.3 N at 0.5 MPa. Because the 760 mm stroke greatly exceeds the 500 mm standard, carefully evaluate side loads to prevent rod bending over that extended distance. The CM round end cover offers a specific rear mounting orientation for your assembly.
Note that a standard cylinder drifts when air is lost or a valve is centered; the TPU bumpers only decelerate the stroke end and never act as a lock. To maintain vertical position, install an external rod lock or a pilot-operated check valve. The -S magnet enables electronic and reed sensors for automated feedback.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI25~40 Stainless Steel Mini Cylinder MI32X760SCM FAQ
This 32 mm bore cylinder features a 1/4 inch port and M10x1.25 male rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa.
No, it uses fixed TPU bumper pads that merely decelerate the stroke end, not an adjustable air cushion. It also drifts if air is lost; use an external rod lock or pilot check valve to hold a load. The -S magnet allows CMSG, DMSG, and EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI32X760SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.