Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110SCA
The AirTAC Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110SCA is a genuine double acting round-body mini air cylinder with a Ø10mm bore and 110mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke110 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110SCA
Delivering 39.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles compact automation tasks with ease. The Ø10 mm bore uses an M5x0.8 air port and an M4x0.7 male rod thread. Because the stainless barrel and rod resist mild corrosion, it outperforms painted alternatives in damp or washdown environments. Riveted construction keeps the body light, while fixed TPU bumper pads absorb impact at the stroke ends.
Equipped with a built-in magnet (-S), it supports CMSG, DMSG and EMSG sensors for position detection. The CA rear pivot cover allows clevis mounting. For real-world work at 0.5 MPa, plan for roughly 24 N of usable load, which means it can lift about 2 kg vertically with a 2:1 safety margin.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110SCA Technical Specifications
| Model | Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110SCA |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110SCA
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 10 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110SCA Is Used
Electronic Component Sorting
Pushes small electronic parts down a testing lane using its 39.3 N thrust, while the CMSG sensor confirms the 110 mm extension.
Small Carton Flap Folding
Folds light cardboard flaps on a packaging line, where the stainless steel body withstands occasional washdowns.
Lab Sample Ejection
Ejects prepared laboratory vials from a carousel using the CA pivot mount to accommodate the angular ejection arc.
Is the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110SCA the Right Cylinder?
This 110 mm stroke sits well within the 200 mm maximum for the Ø10 bore, making it a reliable choice for standard extension needs. If you need less force, the Ø8 bore provides 25.1 N of push at 0.5 MPa; stepping up to the Ø16 bore increases that to 100.5 N. The CA back cover suits pivoting loads, but remember that a plain cylinder drifts if air pressure drops, so add an external rod lock or pilot check valve if you must hold a vertical load safely.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110SCA FAQ
This double-acting cylinder pushes with 39.3 N and pulls with 33 N at 0.5 MPa. At 0.7 MPa, push is 55 N and pull is 46.1 N. The theoretical maximum force is 8 kgf at 1.0 MPa. It features an M5x0.8 air port.
No, the piston will drift if air is removed or the valve is centred. The fixed TPU bumper pads only decelerate the stroke end and do not act as a brake. You need an external rod lock or pilot check valve to hold a load securely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.