Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110SU
The AirTAC Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110SU is a genuine double acting round-body mini air cylinder with a Ø10mm bore and 110mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ10 mm
- Stroke110 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM4×0.7
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110SU
Generating 39.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles a 110 mm stroke with ease. The riveted barrel and piston rod resist mild corrosion, making it a better choice than painted alternatives in damp or washdown-prone environments. Because the bore is Ø10, it carries standard ISO 6432 mounting dimensions, so it drops directly into common mini-cylinder brackets and clevises.
Air enters through an M5x0.8 port to drive the Ø4 mm rod, while fixed TPU bumper pads absorb the impact at each stroke end. The built-in -S magnet supports CMSG, DMSG and EMSG position switches. Plan for a real working load of roughly 24 N (about 60% of the 0.5 MPa rating), which translates to lifting a 2 kg part vertically with a safe 2:1 margin.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110SU Technical Specifications
| Model | Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110SU |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø10 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø10mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 39 N | 33 N |
| 0.7 MPa | 55 N | 46 N |
| Max (@1.0 MPa) | 8 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110SU
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 10 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110SU Is Used
PCB Component Placement
Pushes lightweight electronic pickups along a 110 mm travel path, utilizing the 2 kg safe vertical lift capacity to lower parts gently onto circuit boards.
Small Package Diverter
Actuates a routing flap on a packaging line where the 90-degree U rear cover keeps the M5x0.8 air line neatly out of the main traffic flow.
Lab Sample Ejection
Ejects plastic vials from a test carousel, relying on the stainless-steel construction to withstand daily chemical wipe-downs without corroding.
Is the Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110SU the Right Cylinder?
If 24 N of actual work output is too much for delicate tasks, step down to the Ø8 bore, which provides 25.1 N of push at 0.5 MPa; conversely, heavier mechanisms require the Ø12 bore at 56.5 N. This SKU features a U back cover, orienting the rear port 90 degrees to save space in tight layouts. The 110 mm stroke is well within the 200 mm maximum for this bore, but at full extension you should minimize side loading to prevent bending the Ø4 mm rod.
Note that venting the air or centering the valve causes the piston to drift, as the TPU pads only decelerate the end of travel and do not act as a brake. To suspend a load securely mid-stroke, fit an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110SU FAQ
At 0.5 MPa it pushes 39.3 N and pulls 33 N. At 0.7 MPa it pushes 55 N and pulls 46.1 N. The theoretical maximum force is 8 kgf at 1.0 MPa. The air port is M5x0.8.
Yes, the -S suffix indicates a built-in piston magnet compatible with CMSG, DMSG and EMSG switches. The cylinder does not hold position on air loss; the fixed TPU bumpers only decelerate the stroke end, so use an external rod lock or pilot check valve to suspend loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MI8~12 Stainless Steel Mini Cylinder MI10X110SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.